Instruction for Use

CLOCK

1. Press the Stop button (3 seconds) until the left-hand digit (hour’s)  icker.

2. Press the +/- buttons to set the hours.

3. Press the Start button again. (The two right hand digits (minutes)  icker).

4. Press the +/- buttons to set the minutes.

5. Press the Start button again.

The clock is set and in operation.

Note: When the appliance is  rst plugged in or after a power failure, the display is blank. If the

clock is not set, the display will remain blank until the cooking time is set.

This automatic safety function is activated

one minute after the oven has returned to

“stand by mode“.

PAUSE OR STOP COOKING

To pause cooking:

The cooking can be paused to check, turn or

stir the food by opening the door. The setting

will be maintained for 10 minutes.

To continue cooking:

Close the door and press the Start

button ONCE. The cooking is resumed

from where it was paused.

Pressing the Start button TWICE will increase

the time by 30 seconds.

If you don’t want to continue

cooking:

Remove the food, close the door and

press the STOP button

A beep will signal once a minute

for 10 minutes when the cooking is

 nished. Press the STOP button or open the

door to cancel the signal.

Note: The oven will only hold the settings for

60 seconds if the door is opened and then

closed after the cooking is  nished.

The door must be opened and closed e.g.

putting food into it, before the safety lock is

released. Else the display will show “door“.

Keep the door open while setting

the Clock. This gives you 10 minutes

to complete the setting of the

Clock. Otherwise, each step must be

accomplished within 60 seconds.

START PROTECTION / CHILD LOCK