Instruction for Use

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

1. Hold the ON/OFF button down for more than two

seconds until OFF appears on both indicator

displays (refrigerator and freezer).

2. Pull the plug out of the socket.

! If this procedure is not followed, the alarm may

sound. This alarm does not indicate a malfunction. To

restore normal operation, hold the ON/OFF button

down for more than two seconds. To disconnect the

appliance, follow points 1 and 2 above.

Cleaning the appliance

• The external and internal parts and the rubber seals

may be cleaned using a sponge that has been

soaked in lukewarm water and bicarbonate of soda

or neutral soap. Do not use solvents, abrasive

products, bleach or ammonia.

• The removable accessories may be soaked in warm

soapy water or dishwashing liquid. Rinse and dry

them carefully.

• The back of the appliance may collect dust. This can

be removed by carefully using the hose of a vacuum

cleaner set on medium power. The appliance must

be switched off and the plug disconnected from the

electricity mains before it is cleaned.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic, odour

free materials. Food should be wrapped well and

containers closed properly in order to maintain this

hygiene. This will also prevent the formation of

stains.

• If you wish to switch the appliance off for an

extended period of time, clean the inside and leave

the doors open.

Maintenance and care

Replacing the light bulb

To replace the light bulb in the refrigerator

compartment, disconnect the plug from the electricity

mains.

Access the light bulb as shown

(

see diagram

) and replace it

with a similar light bulb, the

power of which should not

exceed 10 W.