Manual

Operating Your Washer
In This Section
Page
Before starting your washer .............................. 7
Starling or stopping your washer ..................... 7
SelecUng a load size .......................................... 7
SeleclJng wash-rinse temperatures .................. 8
Page
SelecUng a cycle and Urne .............................. 8
Using rinse and spin ...................................... 10
Using drain and spin ..................................... 10
What happens in each cycle ......................... 11
Operating yourwasher properlyensures maximum washingefficiency.This sectiongivesyou
importantinformationto helpyou to select a cycle, time, and temperaturefor yourwash load.
Before starting your washer
Add measured detergent. Then place a sorted NOTE: Ifyour washer/dryer has a Consumer
loadin the washer beforestarting. See page 20 Features Guide, remove itand place itin your
for additional=Beforeyou wash or dry" Use and Care Guide.
information.
Starting or stopping your washer
Starting your washer:
1. Select loadsize and water temperatures.
2. Push in the Cycle Control Knob and turn it
clockwise. Stop when the indicatoron the
knob'souter ring pointsto the number in the
wash cycleyou want. The numbers are
minutesof wash time.
3. Pull out the Cycle Control Knob.
Refer to pages 8-10 for additionalinformation
to helpyou make selections.
Stopping and restarting your washer:
• To stopthe washer at anytime, pushin the
Cycle ControlKnob.
• To restartthe washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Selecting a load size
Position the LoadSize Selector at the setting
that correspondsto the size loadyou want to
wash. Select a load size based uponthe size
of the load and the fabricyou are washing.See
pages 20-21 for additionalloadinginformation.
To change the load size settingafter the
washer has started to fill, move theSelector to
RESET, then to the desired newsetting.