Manual

Removing accumulated lint
from the dryer
Lintcan gatherinside the dryer and be fuelfor
a fire. It is recommendedthat lintbe removed
every 2 to 3 years, or more often, depending
on dryerusage. Cleaning shouldbe done by a
qualified person.If you have any questions,
please call our Consumer AssistanceCenter
at 1-800-253-1301.
Electrical Shock, Personal Injury and
Product Damage Hazard
• Unplugthe power supplycordor turn
offthe electricalpower beforeremoving
dryer panels.
• Make sure the dryeris cool.
• Dryer parts can have sharp edges. Use
care when handling.
• More than one person isrequiredto lift,
tilt or move machine because of its
weight and size.
• Truck only from rear.
Failureto follow the above instructions
could resultin electricalshock,personal
injuryor productdamage.
1. Unplug the power supply cord or turnoff the
electrical power.
2. Remove back panel. See Installation
Instructions.
3. Remove lint from shaded area in illustration
with a softbrushor vacuum cleaner. Avoid
damagingwires, thermostats,funnel (gas),
or ignitor(gas),
4. Replace panel; reconnectand level dryer
again, if necessary.
Heat inlet duct Thermostats Motor
Electric dryer with back panel removed
18