Instruction for Use

GB3

Removal of transport bracket

Thewashingmachineisfittedwithatransportbracketto

avoidanypossibledamageduringtransport.

IMPORTANT: Before using the washing machine, the

transport bracket at the back MUST be removed.

1.Unscrewthetwoscrews“A”andthefourscrews“B”

withaflatscrewdriveroraNo.8hexnutboxspanner.

2.Removethetransportbracket.

3.Replacethefourouterscrews“B”onthemachineand

tightenthem.

4. Clipthetwocovers“C”suppliedintotheopenings“D”

ofthewashingmachine.

Note: do not forget to replace and tighten the four

outer screws.

INSTALLATION

1\3

1.Lid

2.Detergentdispenser

3.Drum

4. Pumpaccessbehindfilter

5.After-SalesServicesticker(behindthe

 filtercover)

6. Mobilitylever(dependingonmodel)

• Tomovethewashingmachine:pullthehandle

outalittlebitbyhandandpullitouttothestop

withthefoot.

7.Adjustablefeet

DESCRIPTION OF THE WASHING MACHINE