Instruction for Use

17
Water hardness:
soft water requires less detergent.
REMOVING THE FILTER
DRAINING RESIDUAL WATER
WATER HARDNESS
CATEGORY:
CHARACTERISTICS GERMAN
°dh
FRENCH
°fh
ENGLISH
°eh
1
2
3
4
soft
average
hard
very hard
0-7
7-14
14-21
over 21
0-12
12-25
25-37
over 37
0-9
9-17
17-26
over 26
1.
Stop the appliance and unplug it.
2.
Open the filter cover.
3.
Place a bowl beneath the filter.
4.
Slowly turn the filter anticlockwise without extracting
it as yet.
5.
Wait until all the water has drained.
6.
Now unscrew the filter completely and extract it.
7.
Remove any foreign items from the foreign body trap.
8.
Insert the filter and screw it in clockwise until it locks,
making sure it is hermetically closed.
9.
Close the cover.
10.
Pour 0.5 l of water into the detergent dispenser to
reactivate the “Eco System”.
11.
Connect the appliance to the electrical outlet.
12.
Select a programme and start it.
•
Check the filter if the appliance is not draining correctly
or if it fails to perform spin cycles.
IMPORTANT: Make sure the water has cooled
before draining the appliance.
•
To drain the residual water from the pump, tilt the appliance forwards and proceed as per points 8 and
10 of the previous chapter.
When should I drain residual water?
•
Before transporting (moving) the appliance.
•
If the appliance is installed in a room subject to sub-zero temperatures.
In this case the appliance should be drained after every wash.
50120022GB.fm Page 17 Friday, August 10, 2007 4:43 PM
Black process 45.0° 150.0 LPI