Operating instructions DISHWASHER EN NL ES Contents EN Product Fiche, 2 English,1 PT Português, 44 Nederlands, 16 Español, 30 Precautions, advice and Assistance, 3-4 General safety Disposal Saving energy and respecting the environment Assistance Installation, 5-6 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Description of the appliance, 7 LFF 8M116 Overall view Control panel Loading the racks, 8-9 Lower rack Cutl
Product fiche EN Product Fiche Brand HOTPOINT ARISTON Model LFF 8M116 Rated capacity in standard place settings (1) 14 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 293.0 Energy consumption of the standard cleaning cycle in kWh 1.03 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.
Precautions, advice and Assistance This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety.
EN Phosphate-free and chlorine-free detergents containing enzymes • We strongly recommend that you use detergents that do not contain phosphates or chlorine, as these products are harmful to the environment. • Enzymes provide a particularly effective action at temperatures around 50°C. As a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle.
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Positioning and levelling Connecting the water outlet hose EN Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. The outlet hose must be at a height ranging from 40 to 80 cm from the floor / surface where the dishwasher rests (A). 1.
EN Anti-condensation strip* After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form. Advice regarding the first wash cycle After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack, if any.
Description of the appliance Overall view EN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Loading the racks EN Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.
Start-up and use EN Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: The ON/OFF indicator light and the display light up. 3. Open the door and pour in a suitable amount of detergent (see below). 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles) by pressing the wash-cycle selection buttons. 6. Select the wash options* (see adjacent information). 7.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. EN The number and type of wash cycles and options may vary depending on the dishwasher model.
Special wash cycles and Options EN Notes: Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.
Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging).
Care and maintenance EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • • • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. The appliance has not been plugged in properly. The dishwasher door has not been shut properly. • The lock was released.
Gebruiksaanwijzing AFWASAUTOMAAT NL Nederlands, 16 Inhoud Productkaart, 17 Voorzorgsmaatregelen en advies, 18 Algemene veiligheid Afvalverwijdering Energiebesparing en respect voor het milieu Installatie, Service 19-20 Plaatsing en waterpas zetten Hydraulische en elektrische aansluitingen Aanwijzingen voor de eerste afwascyclus Technische gegevens Service Beschrijving van het apparaat, 21 LFF 8M116 Aanzichttekening Bedieningspaneel Het laden van de rekken, 22-23 Onderrek Bovenrek Het regelen van de
Productkaart Productkaart NL Merk HOTPOINT ARISTON Model LFF 8M116 Beladingscapaciteit in standaard couverts (1) 14 Energie-efficiëntieklasse op een schaal van A+++ (laag gebruik) tot D (hoog gebruik) A+ Jaarlijks energieverbruik in kWh (2) 293.0 Energieverbruik van de standaard wascyclus in kWh 1.03 Energieverbruik in de off-modus in W 0.5 Energieverbruik in de aan-modus in W 5.0 Jaarlijks waterverbruik in liters (3) 3080.
Voorzorgsmaatregelen en advies NL Hetapparaat is ontworpen en gebouwd overeenkomstig de internationale veiligheidsnormen. Deze aanwijzingen zijn geschreven om veiligheidsredenen en moeten zorgvuldig worden doorgenomen. Bewaar dit boekje zorgvuldig voor eventuele toekomstige raadpleging. Wanneer u het product weggeeft, verkoopt of wanneer u verhuist, dient u dit boekje bij het apparaat te bewaren.
Installatie en Service Als u het apparaat verplaatst moet u het verticaal houden; als dit niet mogelijk is moet u het naar achteren kantelen. Plaatsing en waterpas zetten 1. Haal het apparaat uit de verpakking en controleer dat het geen schade heeft opgelopen tijdens het transport. Als het apparaat beschadigd is, moet u het niet aansluiten maar de dealer inschakelen.
NL Anticondensstrip* Nadat u de afwasautomaat heeft ingebouwd opent u de deur en plakt u de doorzichtige plakstrip onder het houten werkvlak, zodat u het beschermt tegen eventuele condens. Aanwijzingen voor de eerste afwascyclus Na de installatie moet u de beschermelementen op de rekken verwijderen zoals ook de elastieken op het bovenrek (waar aanwezig).
Beschrijving van het apparaat Aanzichttekening NL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Het laden van de rekken NL Advies Voordat u de vaat inlaadt moet u overtollige etensresten verwijderen en glazen en bekers legen. Het is niet noodzakelijk de vaat met water af te spoelen voor u hem in de vaatwasser laadt. Plaats de vaat dusdanig zodat hij stevig vaststaat en niet om kan vallen. Pannen, bakken en glazen moeten met de opening naar onder worden geplaatst en holle of bolle elementen moeten schuin worden geplaatst zodat het water alle oppervlakken kan bereiken en daarna vrijuit kan wegspoelen.
Opklaprekjes met verschillende standen De opklaprekjes aan de zijkant kunnen op drie verschillende hoogten worden gezet om de plaatsing van de vaat in het rek te optimaliseren. Wijnglazen kunnen op een stabiele wijze op de opklaprekjes worden geplaatst door de voet van het glas in de speciale gaten te steken.
Starten en gebruik NL De vaatwasmachine starten 1. Open de waterkraan. 2. Druk op de ON/OFF-toets: het controlelampje ON/OFF en het display gaan aan. 3. Open de deur en doseer het vaatwasmiddel (zie onder). 4. Laad de rekken (zie De rekken laden) en sluit de deur. 5. Kies het programma naar gelang het soort vaatwerk en het type vuil (zie de programmatabel) door op de toetsen voor het selecteren van een programma te drukken. 6. Selecteer de wasopties* (zie hiernaast). 7.
Programma’s De gegevens van de programma’s zijn gemeten in laboratoriumomstandigheden volgens de Europese vorm EN 50242. Aan de hand van de verschillende gebruiksmogelijkheden kunnen de duur en de programmagegevens verschillen. Het aantal en het soort programma’s en opties verschilt aan de hand van het model afwasautomaat.
Speciale programma's en Opties NL N.B.: de beste prestaties van de programma's "Snel en Express 30'" worden bereikt als u het aantal aangegeven couverts niet overschrijdt. Voor een zuiniger verbruik de afwasmachine volgeladen laten draaien. Aanwijzing voor de Proeflaboratoria: voor gedetailleerde informatie over de omstandigheden van de EN-vergelijkingsproef kunt u contact opnemen met: ASSISTENZA_EN_LVS@indesitcompany.
Glansmiddel en zout Gebruik uitsluitend producten die speciaal voor vaatwasmachines bestemd zijn. Gebruik geen keukenzout of industrieel zout en ook geen wasmiddelen voor handwas. Volg de aanwijzingen op de verpakking. Als u een multifunctioneel product gebruikt, is het niet nodig een glansmiddel toe te voegen. Wij raden u echter wel aan onthardingszout toe te voegen, als het water hard of zeer hard is. (Volg de aanwijzingen op de verpakking).
Onderhoud en verzorging NL Water en elektrische stroom afsluiten • Sluit na elke afwasbeurt de waterkraan af om lekkage te voorkomen. • Haal de stekker uit het stopcontact tijdens reiniging en onderhoud. Reinigen van de afwasautomaat • De buitenkant en het bedieningspaneel kunnen worden gereinigd met een natte, niet schurende doek. Gebruik geen oplosmiddelen of schuurmiddelen. • De vlekken aan de binnenkant van de afwasautomaat kunnen worden verwijderd met een natte doek en wat azijn.
Storingen en oplossingen Als er storingen zijn in de werking van het apparaat dient u eerst de volgende punten na te gaan voor u zich tot de Servicedienst wendt. Storingen: Mogelijke oorzaken / Oplossingen: De vaatwasser start niet of volgt de opdrachten niet op • S chakel het apparaat uit met de ON/OFF toets, schakel het na een minuut weer in en stel het programma opnieuw in. • De stekker zit niet goed in het stopcontact. • De deur van de vaatwasser is niet goed dicht.
Manual de Instrucciones ES Español, 30 LAVAVAJILLAS Sumario Ficha del producto, 31 Precauciones y consejos, 32 Seguridad general Eliminación Ahorrar y respetar el medio ambiente Instalación y asistencia, 33-34 Colocación y nivelación Conexiones hidráulicas y eléctricas Datos técnicos Advertencias para el primer lavado Asistencia Descripción del aparato, 35 Vista de conjunto Panel de mandos LFF 8M116 Cargar los cestos, 36-37 Cesto inferior Cesto de los cubiertos Cesto superior Regulación del cesto supe
Ficha del producto ES Ficha del producto Marca HOTPOINT ARISTON Modelo LFF 8M116 Capacidad nominal en número de cubiertos estándar (1) 14 Clase de eficiencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo) A+ Consumo energético anual en kWh (2) 293.0 Consumo energético del ciclo de lavado estándar en kWh 1.03 Consumo de potencia en el modo apagado en W 0.5 Consumo de potencia en el modo espera en W 5.0 Consumo de agua anual en litros (3) 3080.
Precauciones y consejos ES El aparato ha sido proyectado y fabricado en conformidad con las normas internacionales de seguridad Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, el manual debe permanecer junto al aparato. Lea atentamente las instrucciones: contienen información importante sobre la instalación, sobre el uso y sobre la seguridad.
Instalación y Asistencia Técnica En caso de traslado mantener el aparato en posición vertical; si fuera necesario inclinarlo, hacerlo hacia la parte posterior. Colocación y nivelación 1. Desembalar el aparato y comprobar que no haya sufrido daños durante el transporte. Si estuviera dañado, no conectarlo; llamar al revendedor. Conexión del tubo de descarga de agua Conectar el tubo de descarga, sin plegarlo, a una tubería de descarga con un diámetro mínimo de 4 cm.
ES Cinta anticondensación* Después de haber empotrado el lavavajillas, abra la puerta y pegue la cinta adhesiva transparente debajo de la superficie de madera para protegerla de una posible condensación. Advertencias para el primer lavado Después de la instalación, quite los tapones colocados en los cestos y los elementos elásticos de bloqueo del cesto superior (si existen). Inmediatamente antes del primer lavado, llene completamente de agua el depósito de sal y agregue aproximadamente 1 kg.
Descripción del aparato Vista de conjunto ES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Cargar los cestos ES Sugerencias Antes de cargar los cestos, eliminar de la vajilla los residuos de alimentos y vaciar los vasos y las copas. No es necesario aclarar la vajilla con agua corriente. Disponer la vajilla de manera que quede firme y no se vuelque. Los recipientes deben colocarse con la abertura hacia abajo y las partes cóncavas o convexas en posición oblicua, para permitir que el agua alcance todas las superficies y fluya.
Cestos adicionales de posición variable Los cestos adicionales laterales se pueden colocar a tres alturas diferentes para optimizar la disposición de la vajilla en el cesto. Las copas se pueden colocar de forma estable en los cestos adicionales, introduciendo el pie en las ranuras correspondientes.
Puesta en funcionamiento y uso ES Poner en funcionamiento el lavavajillas Cargar el detergente 1. Abrir el grifo de agua. 2. Pulsar la tecla ON-OFF: el testigo ON/OFF y la pantalla se encienden. 3. Abrir la puerta y dosificar el detergente (ver más abajo). 4. Cargar los cestos (ver Cargar los cestos) y cerrar la puerta. 5. Seleccionar el programa según la vajilla y su grado de suciedad (ver la tabla de programas) pulsando las teclas de selección de programa. 6.
Programas Los datos de los programas se obtienen en condiciones de laboratorio según la Norma Europea EN 50242. La duración y los datos de los programas pueden variar según las distintas condiciones de uso. ES El número y el tipo de programas y opciones varían según el modelo de lavavajillas.
Programas especiales y opciones ES Notas: las mejores prestaciones de los programas "Rápido y Express 30’" se obtienen preferiblemente respetando la cantidad de cubiertos indicada. Para consumir menos utilizar el lavavajillas a plena carga. Nota para los laboratorios de pruebas: para obtener información detallada sobre las condiciones de la prueba comparativa EN, escribir a la siguiente dirección: ASSISTENZA_EN_LVS@indesitcompany.
Abrillantador y sal regeneradora Utilizar sólo productos específicos para lavavajillas. No utilizar sal de cocina o industrial ni detergentes para lavar a mano. Seguir las indicaciones del envase. Si se utiliza un producto multifunción, no es necesario agregar abrillantador, pero se aconseja añadir sal, especialmente si el agua es dura o muy dura. (Seguir las indicaciones del envase.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica • Cerrar el grifo de agua después de cada lavado para prevenir el riesgo de pérdidas. • Desconectar la clavija de la toma de corriente para la limpieza y los trabajos de mantenimiento. Limpiar el lavavajillas • La superficie externa y el panel de control se pueden limpiar con un paño no abrasivo humedecido con agua. No utilizar disolventes ni productos abrasivos.
Anomalías y soluciones Si el aparato presenta anomalías de funcionamiento, controlar los siguientes puntos antes de llamar al Servicio de Asistencia Técnica. Anomalías: Posibles causas / Solución: El lavavajillas no arranca o no responde a los mandos • Apagar la máquina con la tecla ON/OFF, volver a encenderla después de un minuto aproximadamente y elegir el programa. • La clavija no está bien introducida en la toma de corriente. • La puerta del lavavajillas no está bien cerrada.
Instruções de uso MÁQUINA DE LAVAR LOUÇA PT Resumo Ficha de produto, 45 Português, 44 Precauções e conselhos, 46 Segurança geral Eliminação Economizar e respeitar o ambiente Instalação e assistência, 47-48 Posicionamento e nivelamento Ligações hidráulicas e eléctricas Dados técnicos Advertências para a primeira lavagem Assistência Descrição do aparelho, 49 Visão de conjunto Painel de comandos LFF 8M116 Carregar os cestos, 50-51 Cesto inferior Cesto dos talheres Cesto superior Regulação do cesto supe
Ficha de produto PT Ficha de produto Marca HOTPOINT ARISTON Modelo LFF 8M116 Capacidade nominal, em serviços de louça-padrão (1) 14 Classe de eficiência energética numa escala de A+++ (baixos consumos) a D (altos consumos) A+ Consumo de energia anual em kWh (2) 293.0 Consumo de energia do ciclo de lavagem normal em kWh 1.03 Consumo, em termos de potência, em estado de desactivação em (W) 0.5 Consumo, em termos de potência, em estado inactivo em (W) 5.
Precauções e conselhos PT O aparelho foi projectado e construído conforme as normas internacionais de segurança. Estas advertências são fornecidas por razões de segurança e devem ser lidas com atenção. É importante conservar este manual para poder consultá-lo em qualquer momento. Em caso de venda, cessão ou mudança, certifique-se que o mesmo fique junto ao aparelho. Ler atentamente as instruções: nelas estão presentes informações importantes sobre a instalação, o uso e a segurança.
Instalaçãoe Assistência No caso de mudança mantenha o aparelho em posição vertical; se for necessário, deite-o para trás. Posicionamento e nivelamento 1. Desembale o aparelho e controle que não tenha sofrido danos durante o transporte. Se estiver danificado, não o acenda e contacte o revendedor. Ligação do tubo de descarregamento da água Ligar o tubo de descarregamento, sem dobrá-lo, a um conduto de descarga com diâmetro mínimo de 4 cm.
PT Fita contra a condensação* Depois de ter encaixado a máquina de lavar louça, abra a porta e cole a fita adesiva transparente embaixo da prateleira de madeira para protegê-la contra eventual condensação. Advertências para a primeira lavagem Depois da instalação, remova os tampões posicionados nos cestos e os elásticos de retenção no cesto superior (se presentes).
Descrição do aparelho Visão de conjunto PT Cesto superior Braço aspersor superior Peças basculantes Regulação da altura do cesto superior Cesto inferior Braço aspersor inferior Filtro de lavagem Reservatório do sal Recipiente do detergente, reservatório do abrilhantador e dispositivo Active Oxygen* Placa das características Painel de comandos*** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Carregar os cestos PT Sugestões Antes de carregar os cestos, elimine os resíduos de comida das louças e esvazie os líquidos restantes dos copos e dos recipientes. Não é necessário enxaguar antes sob água corrente. Coloque a louça de forma que fique bem fixa e não possa tombar. Os recipientes devem ser colocados com a abertura virada para baixo e as partes côncavas ou convexas na posição oblíqua, para permitir que a água chegue a todas as superfícies e deflua.
Peças basculantes com posição variável As peças basculantes podem ser posicionadas em três alturas diferentes para optimizar a disposição das louças no espaço do cesto. Os cálices podem ser posicionados de modo estável nas peças basculantes, inserindo a haste do copo na específica abertura.
Início e utilização PT Ligar a máquina de lavar louça 1. Abra a torneira da água. 2. Carregue na tecla ON-OFF: O indicador luminoso ON/OFF e o ecrã acendem-se. 3. Abra a porta e doseie o detergente (veja a seguir). 4. Carregue os cestos (consulte Carregar os cestos) e feche a porta. 5. Seleccione o programa em função das louças e do grau de sujidade (consulte a tabela dos programas)) pressionando as teclas de selecção de programa. 6. Seleccione as opções de lavagem*. 7.
Programas Os dados dos programas são medidos em laboratório de acordo com a norma europeia EN 50242. Consoante as diferentes condições de utilização, a duração e os dados dos programas podem diferir. PT O número e o tipo de programas e as opções variam conforme o modelo de máquina de lavar louça.
Programas especiais e opções PT Observações: o melhor desempenho dos programas “Rápido/Fast e Express 30'” obtém-se preferencialmente respeitando o número máximo de louças especificado. Para consumir menos, utilize a máquina com carga total. Nota para os Laboratórios de Ensaio: para informações sobre as condições do ensaio comparativo EN, solicitar ao endereço: ASSISTENZA_EN_LVS@indesitcompany.
Abrilhantador e sal regenerante Use somente produtos específicos para máquinas de lavar louça. Não use sal de cozinha ou industrial nem detergentes para a lavagem à mão. Siga as indicações escritas na embalagem. Se utilizar um produto multifunções, não será necessário acrescentar abrilhantador e aconselha-se a adição de sal, especialmente se a água for dura ou muito dura. (Siga as indicações escritas na embalagem).
Manutenção e cuidados PT Excluir a água e a corrente eléctrica • Feche a torneira da água após cada lavagem para eliminar o risco de vazamentos. • Desligue a ficha da tomada quando limpar a máquina e durante os serviços de manutenção. Limpar a máquina de lavar louça • A superfície externa e o painel de comandos podem ser limpos com um pano não abrasivo embebido de água. Não usar solventes nem detergentes abrasivos.
Anomalias e soluções No caso em que o aparelho apresente anomalias de funcionamento, controle os seguintes itens antes de contactar a Assistência Técnica. Anomalias: Possíveis causas / Solução: • Desligar a máquina com a tecla ON/OFF, ligar novamente após um minuto e reprogramá-la A máquina de lavar louça não novamente. começa a funcionar ou não responde • A ficha não foi inserida correctamente na tomada de corrente. aos comandos • A porta da máquina de lavar louça não está bem fechada.
PT 58
PT 59
195112856.