User Guide

Common washer problems

Before calling for service, check these:

Is the lid closed?

Is the Cycle Selector Knob set and the StarUPause button pushed?

NOTE: The Cycle Selector Knob does not rotate as the cycle advances.

•r!l

Is the power cord firmly plugged into a live outlet with proper voltage?

Have you blown a household fuse or tripped a circuit breaker?

Are both the hot and cold water faucets turned on?

Are the water hoses kinked or clogged?

Is the drain hose lower than the water level in the washer? It must be higher.

Is the washer making noises or vibrating?

Is the wash load properly distributed around the agitator?

If none of these items was causing your problem, see “Requesting Assistance or Servlc6” on page 21 or 22.