Instruction Manual

Service or performance problems caused by the use of any product
not manufactured by Whirlpool Corporation are the responsibiiity of
the manufacturer of that product.
Winterizing
Because some water stays in the washer, freez
ing can cause a lot ot damage. If your washer is
stored or moved during the cold weather...
1. Shut oft both water
faucets. Discon
nect and drain
water inlet hoses.
Put a quart of
automobile-type
antifreeze in the
basket.
Set the washer for a
DRAIN and SPIN
(see page 8). Let it
run for about 30
seconds to mix the
antifreeze and
water.
1. Flush water pipes and hoses.
2. Connect hoses to the washer.
3. Turn on the water faucets.
4. Run the washer
through a com
plete cycle with
one cup of deter
gent to clean out
the antifreeze.
10