Manual

Using your Washer
water aaving
load size selector
temperature selector
1
star* your Aasrie' at’e^yoi.- DaI
detergent t^^e load C'ld yny ot"er
oundry aids accoramg tO' nformatior'
on page 3 and page 6
1. Set the LOAD SIZE SELECTOR.
• Select the -A-ater 'eve' that matches
the see of the load See page 5 for
more informatior
M^OISTANT ^or the besr cleaning
results with the least wcinkling, make
sure the load has enougn water for
items to move freely.
2. Set the TEMPERATURE SELECTOR.
• Match the wash water temperature to
the type of fabrics and soils being
washed. All rinses are cold
Cold water rinses save energy
and help prevent wrinkles from
setting into fabrics.
3. Select a Cycle and Start the
Washer.
• Push the Cycle Control Knob in and
turn it to the nghf [clockwise)
• Stop when the pointer is on the ,ni;m
ner of minutes of washing you w'ont
n the cycle you want
• Instructions for which cycles to use for
each fabric type are under the lid
• To start the washer, pull the Cycle
Control Knob out. When the cycle is
over, the washer will stop
• To stop the washer at any time
during a cycle, push the Control
Knob in. Pull it out to restart the washer
• To change a setting, push the Con
trol Knob In to stop the washer. Then turn
the Control Knob to the right (clockwise)
to the setting you want. Pull the knob
out to start the washer
• Pages 8-9 show what happens in
each cycle