Instruction for Use

GBGB
GBGB
GB
15
Practical advice on using the appliance
 Use cookware made from materials that are
compatible with the induction principle
(ferromagnetic material). We especially recommend
pans made from: cast iron, coated steel or special
stainless steel adapted for induction. Use a magnet
to test the compatibility of the cookware.
In addition, to obtain the best results from your hob:
 Use pans with a thick, flat base to fully utilise the
cooking zone.
 Always use pans with a diameter that is large
enough to cover the hotplate fully, in order to use
all the available heat.
 Make sure that the base of the cookware is
always dry and clean, to fully utilise and extend
the life of both the cooking zones and cookware.
 Avoid using the same cookware that has been
used on gas burners: the heat concentration on
gas burners may distort the base of the pan,
causing it not to adhere correctly.
Safety devices
Pan sensor
Each cooking zone is equipped with a pan sensor
device. The hotplate only emits heat when a pan
with suitable measurements for the cooking zone is
placed on it. If the indicator light is flashing, it may
indicate:
 An incompatible pan
 A pan whose diameter is too small
 The pan has been removed from the hotplate.
Residual heat indicators
While the temperature of the cooking zone remains
above 60°C, even after the programme has finished,
the residual heat indicators placed near the relevant
cooking zone remain lit to prevent the risk of burns.
Overheating protection
If the electronic elements overheat, the hob switches
off automatically and  appears on the display.
When the temperature has reached an appropriate
level, this message disappears and the hob may be
used again.
Safety switch
The appliance has a safety switch that automatically
switches off the cooking zones when they have been
in operation for a certain amount of time at a given
power level. When the safety switch has been
triggered, the display shows 0.
For example: the right rear hotplate is set to 5 and
will switch off after 3 hours of continuous operation,
while the front left hotplate is set to 2 and will switch
off after 10 hours.
*
SUITABLE
UNSUITABLE
Cast iron
Enamelled steel
Special stainless steel
Copper,
Aluminium, Glass, Earthenware,
Ceramic, non magnetic Stainless steel
Power level Operating time limit in hours
110
26
3-4-5 5
64
7-8 3
9-10 2
11 1