Instruction for Use
55
SAFEGUARDING THE ENVIRONMENT
1. Packing
The packing material is 100% recyclable and bears
the recycling symbol
.Fordisposal,complywith
thelocalregulations.Keepthepackingmaterials
(plasticbags,polystyreneparts,etc.)outofthe
reach of children, as they are a potential source of
danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste Electrical
andElectronicEquipment(WEEE).Byensuring
the correct disposal of this appliance, you can help
prevent potentially negative consequences for the
environmentandthehealthofpersons.
The symbol
on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic waste
but must be taken to a special collection centre for
therecyclingofelectricalandelectronicequipment.
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the doors
and shelves so that children cannot easily climb
insideandbecometrapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potentialsourceofdangerforchildren.
For further information on the treatment, recovery
and recycling of this product, contact your
competent local office, the household waste
collection service or the shop where you purchased
theappliance.
Declaration of conformity
• This appliance has been designed for preserving
food and is manufactured in compliance with
Regulation(CE)No.1935/2004.
• This appliance has been designed, manufactured
and marketed in compliance with:
- safety objectives of the “Low Voltage” Directive
2006/95/CE(whichreplaces73/23/CEEand
subsequentamendments);
- the protection requirements of Directive “EMC”
2004/108/EC.
To ensure best use of your appliance, carefully
read the operating instructions which contain a
description of the product and useful advice.
Keep these instructions for future reference.
1. After unpacking the appliance, make sure it is not
damagedandthatthedoorclosesproperly.Any
damage must be reported to the dealer within
24 hoursofdeliveryoftheappliance.
2. Wait at least two hours before switching the
appliance on, to ensure that the refrigerant circuit
isfullyefficient.
3. Cleantheinsideoftheappliancebeforeusingit.
BEFORE USING THE APPLIANCE