Instruction for Use Notice d’emploi Istruzioni per l’uso Instrucciones de uso Instruções de utilização
FIG. 1 FIG. 2 594-597 mm x 28 450-455 mm 2 mm 22 m 428 mm 19- 545 mm 450 mm FIG. 2A m 45 m 2 mm m 8 mm 850 mm Min 560 + 450 + 2 mm 45 m m 45 m m .
FIG. 3 FIG. 5 x1 x1 x4 . 350 approx 560 + 1 mm mm FIG. 4 FIG. 6 x2 x4 FIG.
A15 A16 A21 A A22 A17 A2 A3 A5 A7 A8 A20 A6 A19 A9 A1 A13 A18 A10 A4 A12 A14 5
B B2 B3 B4 B5 B6 00:00 B1 AROMA B11 PROFILE 1 SELECT BEVERAGE QUANTITY B8 B10 ESPRESSO B9 C B7 COFFEE CAPPUCCINO C1 LATTE MACCHIATO C4 C3 C2 C5 D2 D D5 D1 D4 D7 D3 D6 6
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 8
31 32 33 34 35 36 37 38 39 40 41 9
CONTENTS SAFETY INSTRUCTIONS .......................................................11 MAKING COFFEE ..................................................................19 SAFEGUARDING THE ENVIRONMENT ..................................13 MAKING CAPPUCCINOS AND MILK-BASED COFFEES...........21 Important to be read and observed .................... 11 Safety warnings .................................................. 11 Permitted use ..................................................... 11 Installation .....
SAFETY INSTRUCTIONS Important to be read and observed Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions are also available on docs.whirlpool.eu These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
This appliance is Not intended to be used in similar application such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfast and other residential environments. This appliance is not for professional use. Do not use the appliance outdoors. Do not store explosive or flammable substances (e.g. gasoline or aerosol cans) inside or near the appliance - risk of fire.
WARNING: Avoid any spillage on the con- SAFEGUARDING THE ENVIRONMENT EN Disposal of packaging materials nector and plug. The packaging material is 100% recyclable and is marked with the recycle symbol( ). The various parts of the packaging must therefore be disposed of responsibility and in full compliance with local authority regulations governing waste disposal.
BUILT-IN INSTALLATION Verify the minimum measurements required for correct installation of the appliance. The coffee machine must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets. • Kitchen furniture in direct contact with the appliance must be heat resistant (65°C min). • To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements in figure 1).
INTRODUCTION Description of the homepage (main screen) (page 6 - B) Letters in brackets B1. B2. B3. B4. B5. B6. B7. B8. B9. : menu to customise the beverages settings : appliance settings menu Selected aroma Clock Selected quantity : aroma selection : quantity selection : scroll arrow or Beverages available for selection (press the scroll arrows to display all the beverages, the bottom bar indicates which screen you are viewing) : scroll arrow B10. B11.
TURNING THE APPLIANCE OFF appliance is pressed down (fig. 2); (B10) or (B8) until the 2. SELECT LANGUAGE : press flag corresponding to the required language appears on the display (B), then press the flag; Follow the instructions indicated on the appliance display: 1. FILL TANK WITH FRESH WATER : remove the water tank (A12) (fig. 3), open the lid (fig. 4), fill to the MAX line (marked on the inside of the tank) with drinking water (fig. 5), close the lid and put the tank back in the appliance (fig. 6); 2.
• • make coffee immediately. If the appliance is not used for more than 3-4 days, when switched on again, we strongly recommend performing 2/3 rinses before use; After cleaning, it is normal for the grounds container (A10) to contain water. To enable this function, the time must already be set correctly (see section “Set time ”). To enable auto-start, proceed as follows: (B2) to enter the menu; 1. Press (B10) or (B8) until AUTO-START ap2. Press pears on the display (B); . The time setting pan3.
with European regulations. To disable or enable "Energy Saving", proceed as follows: (B2) to enter the menu; 1. Press 2. Press (B10) or (B8) until ENERGY SAVING appears on the display (B); to enable or disable 3. Press energy saving. 4. Press to go back to the homepage. The corresponding symbol appears on the display alongside the time to indicate that the function has been enabled. Cup light This function enables or disables the cup lights (A18).
empty the grounds container (A10) and drip tray (A14). ; Press 5. INSERT GROUNDS CONTAINER AND DRIP TRAY : insert the drip tray complete with grounds container; 6. PLACE 0.5l CONTAINER UNDER SPOUTS, PRESS OK TO START : position a container under the coffee spouts (A13) and hot (fig. 8); water spout (C4). Press Statistics This displays statistics relating to the machine. To display the statistics, proceed as follows: 1. Press (B2) to enter the menu; 2.
Making coffee using coffee beans • Do not use green, caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable. If you use pre-ground coffee, you can only make one cup of coffee at a time. AROMA (B6) repeatedly until (pre-ground) 1. Press appears on the display (B). 2. Open the lid (A15). 3. Make sure the funnel (A21) is not blocked, then add one level measure of pre-ground coffee (fig. 14). 4. Place a cup under the coffee spouts (A13) (fig. 13). 5.
coffee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click. Dial position Tips for a hotter coffee For hotter coffee, you should: • perform a rinse cycle by selecting the "Rinsing" function in the settings menu (section “Rinsing ”); • warm the cups with hot water using the hot water function (see section “Delivering hot water”; • increase the coffee temperature in the settings menu (see section “Coffee temperature ”).
Cleaning the milk container after use “Customising the beverages” and “Memorising your personal profile”). WARNING When cleaning the internal tubes of the milk container, a little hot water and steam leak out of the frothed milk spout (D5). Avoid contact with splashes of water. Each time you use a milk function, TURN DIAL TO POSITION TO START CLEANING appears on the display and the milk frother lid must be cleaned: 1. Leave the milk container (D) in the machine (you do not need to empty it); 2.
MEMORISING YOUR PERSONAL PROFILE 5. Wash all parts with warm water. 6. Insert the connection nozzle, then the cappuccino maker on the spout by pushing it upwards and turning it clockwise until it is attached. The appliance allows you to memorise 6 different profiles, each associated with a different icon. The customised MY beverages AROMA and QUANTITY values are saved in each profile (see section “Customising the beverages CUSTOMISING THE BEVERAGES ”).
necessary, remove coffee deposits. appliance cannot be used to make coffee until you have cleaned the grounds container (A4). Even if not full, the empty grounds container message is displayed 72 hours after the first coffee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned off with the main switch. To clean (with the machine on): 1. Open the bottom door by rotating it downwards (fig. 25). 2. Remove the drip tray (A14) (fig. 27), empty and clean. 3.
6. 7. 8. 9. 10. spouts (A13) (fig. 8); the container are dishwasher safe, placing them in the top basket of the dishwasher. Make sure there are no milk residues on the hollow and groove under the dial (fig. 37). Rinse inside the froth adjustment dial seat (fig. 38) and the milk frother connector hole. Check that the intake tube and spout are not clogged with milk residues. Replace the dial (lining up the arrow with the word INSERT), spout and milk intake tube.
• • • electricity) we recommend repeating the cycle; After descaling, it is normal for the grounds container (A4) to contain water. If the water tank has not been filled to the MAX level, at the end of descaling, the appliance requests a third rinse to guarantee that the descaler solution has been completely eliminated from the machine's internal circuits. Before starting rinsing, remember to empty the drip tray; The appliance may request descaling cycles at very short intervals.
DISPLAYED MESSAGES EN DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK WITH FRESH WATER Insufficient water in the tank (A12). Fill the tank with drinking water and/or insert it correctly, pushing it as far as it will go until it clicks into place. INSERT WATER TANK The tank (A12) is not correctly in place. Insert the tank correctly and press as far as it will go. EMPTY GROUNDS CONTAINER The grounds container (A4) is full. Empty the grounds container and drip tray (A14), clean and replace.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY ADD PRE-GROUND COFFEE MAXIMUM ONE MEASURE The "pre-ground coffee" function has been Place pre-ground coffee in the funnel (fig. 14) and selected without placing any pre-ground repeat delivery coffee in the funnel (A21). The pre-ground coffee funnel (A21) is Empty the funnel with the help of the brush (C3) as clogged. described in section “Cleaning the pre-ground coffee funnel”.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY SELECT A MILDER TASTE OR Too much coffee has been used. REDUCE PRE-GROUND COFFEE QUANTITY Select a milder taste by pressing AROMA (B6) or reduce the quantity of pre-ground coffee (maximum 1 measure). INSERT WATER SPOUT The hot water spout (C4) is not inserted or Insert the water spout as far as it will go. is inserted incorrectly INSERT MILK CONTAINER The milk container (D) is not inserted correctly.
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY PRESS OK TO START CLEANING The milk container has been inserted To proceed with the CLEAN function, press PROCESS OR TURN MILK FROTH with the froth adjustment dial (D1) in the or turn the froth adjustment dial to one of the milk CLEAN position. ADJUSTMENT DIAL positions. TURN DIAL TO POSI- Milk has been delivered recently and the TION TO START CLEANING tubes inside the milk container must be cleaned (D).
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY The appliance needs descaling. The descaling procedure described in section “Descale” needs to be performed and/or the filter needs replacing or removing as described in section “Water softener filter”. The tubes inside the milk container (D) Turn the froth adjustment dial (D1) to CLEAN (fig. 21). must be cleaned. The machine must be descaled. The descaling procedure described in section “Descale” needs to be performed. The auto-start function is enabled.
TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water (Please note! you can use the hot water function). The infuser has cooled down because Before making the coffee, heat the infuser by 2/3 minutes have elapsed since the rinsing using the rinse function (see section “Rinsing ”).
PROBLEM POSSIBLE CAUSE REMEDY The milk contains large bubbles and The milk is not cold enough or is not Use skimmed or semi-skimmed milk at refrigersquirts out of the milk spout (D5) or semi-skimmed or skimmed. ator temperature (about 5° C). If the result is not there is little froth as you wished, try changing brand of milk. The froth adjustment dial (D1) is incor- Adjust following the instructions in section rectly adjusted. “Adjusting the amount of froth”.
DOPPIO+ Origin PROCESS RESULT IN CUP OCCASION OF USE AMERICANO Origin PROCESS RESULT IN CUP ESPRESSO MACCHIATO Origin PROCESS RESULT IN CUP OCCASION OF USE CAPPUCCINO Origin PROCESS RESULT IN CUP OCCASION OF USE CAPPUCCINO+ Origin PROCESS RESULT IN CUP OCCASION OF USE Italy Grinding Brewing Coffee powder Pre-infusion Infusion Default Quantity Cream Taste need for energy 15gr reduced pre infusion higher pressure than espresso ~ 120ml thicker and darker than espresso stronger than espresso USA, UK
CAPPUCCINOMIX Origin PROCESS RESULT IN CUP OCCASION OF USE LATTE MACCHIATO Origin PROCESS RESULT IN CUP OCCASION OF USE FLAT WHITE Origin PROCESS RESULT IN CUP OCCASION OF USE CAFFELATTE Origin PROCESS RESULT IN CUP OCCASION OF USE Italy Coffee balanced (~ 80ml) Milk balanced (~ 70ml) Milk foam maximum level Delivery order coffee first, milk afterwards Visual uniformly brown milk drink Milk foam light brown with coffee taste every moment of the day, people who loves melted milk and coffee tastes Italy
400011318701