Setup and user guide

5
POSITIONING AND LEVELLING
1. Position the dishwasher on a level sturdy floor. If
the floor is uneven, the front feet of the appliance
may be adjusted until it reaches a horizontal
position. If the appliance is levelled correctly, it
will be more stable and much less likely to move
or cause vibrations and noise while it is
operating.
2. Before recessing the dishwasher, stick the
adhesive transparent strip under the wooden shelf
in order to protect it from any condensation
which may form.
3. Place the dishwasher so that its sides or back
panel are in contact with the adjacent cabinets or
the wall. This appliance can also be recessed
under a single worktop.
4. To adjust the height of the rear foot, turn the red
hexagonal bushing on the lower central part at the
front of the dishwasher using a hexagonal
spanner with an opening of 8 mm. Turn the
spanner in a clockwise direction to increase the
height and in an anticlockwise direction to
decrease it.
DIMENSIONS, CAPACITY AND STANDBY
CONSUMPTION:
WIDTH 598 mm
HEIGHT 820 mm
DEPTH 555 mm
CAPACITY 14 standard place-settings
STANDBY
CONSUMPTION:
Left-on mode - 5 W
Off mode - 0.5 W