Use and care guide

40
FAILURE INDICATOR AND MESSAGES
Make sure to
Empty the water tank after each programme
• Clean the door lter after each programme
• Clean the bottom lter after every fth programme
Refer to section CARE AND MAINTENANCE for
emptying water tank or cleaning lters.
Failure Indicator Display message Possible Cause Solution
WATER TANK
FULL
Water tank may be
• lled with water • Empty water tank; make sure to
insert it properly afterwards.
• not correctly positioned • Push in the water tank to make
sure that it is correctly inserted in
the tank compartment.
CLEAN
BOTTOM
FILTER
Bottom lter may be
• blocked by lint • Clean the bottom lter;
make sure to insert it properly
afterwards
• not correctly positioned • Push in the bottom lter and
move the release levers into
vertical position, to make sure
that the lter is correctly inserted
in the lter compartment. Close
the ap.
CLEAN
DOOR
FILTER
Door lter may be
• blocked by lint • Remove and clean the door
lter; make sure to insert it
properly afterwards so that it
completely integrates in the lter
compartment.
• not correctly positioned • Check position of the door
lter; make sure that it is
properly inserted in the lter
compartment.