Use and care guide

REVERSING THE DOOR STOP

If needed, the door stop of the dryer door can be

reversed. Use pliers and a cross-head screwdriver for

the procedure.

For removing and xing the door, the help of a

second person is recommended. Make sure that the

dryer is unplugged. Open the dryer door.

3. Remove the two screws on the door hinge.

4. Remove the door and carefully lay it upside

down on a blanket or similar.

1. Remove the two screws which are situated

over and under the door lock, left from the door

opening.

2. Press the small knob above the door lock

with a small screwdriver. At the same time move

upwards the door lock and pull it towards you with

your nger.