Use and care guide
27
EN
ENERGY SAVING TIPS
• To reduce the drying time, make sure that the
laundry is spun with the maximum possible spin
speed of the drying programme. This reduces the
moisture content in the laundry.
• Preferably dry a full load, as indicated in the
Programmes table. This optimizes the relative
energy consumption.
• Do not over dry the laundry.
• Clean the door lter after every drying cycle.
• Clean the bottom lter after every fth drying
cycle.
• The optimum ambience temperature for the
dryer is between 15 and 20 °C. In case of a higher
temperature, air the room.
• Use Gentle option only with small loads.
• When drying cotton or synthetics laundry, run
Iron dry and Cupboard dry loads together. Start
the programme with dryness level Iron dry. At the
end of the programme, remove the laundry to be
ironed. Finish the drying process for the remaining
load with dryness level Cupboard dry.
• Use the Remote Control mode to program and
start the dryer while the energy costs are lower
ENERGY SAVING
AUTOMATIC SWITCHOFF FUNCTION
The dryer is designed to save energy. After the
programme has nished, it therefore switches o
automatically after about a quarter of an hour.
The period from programme end to automatic
switching o (= Eco mode) can be prolonged, or the
automatic switch-o function can even be disabled.
Refer to section FUNCTIONS / SETTINGS