Setup and user guide
2
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the water tank is correctly inserted.
Make sure that the drain hose on the back of the dryer is xed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS AND TIPS”.
Make sure that pockets are empty.
• Open the door and load the laundry. Observe the
maximum load sizes given in the PROGRAMME
CHART.
2. CLOSE THE DOOR
• Make sure that no items get stuck between
the door glass and door lter.
• Close the door so that you can hear it click
shut.
3. SWITCH ON DRYER
• Press the On/O button until the programme button lights
up. An animation will appear on the display, followed by a
beep. The dryer should be then ready for use.
4. SET THE DESIRED PROGRAMME
GUIDED MODE
The button light will guide you through setting your programme in
the following order: selection of programme / drying time (ONLY if
Drying time or Airing programme is selected) / dryness level (only if
selectable/adjustable) / options. As soon as you conrm a selection
by pressing the knob, the button light will jump to the next step.
FIRST TIME USE
DAILY USE
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
Make sure that no lighters or
matches are left in clothing.
Make sure that the laundry is
not soaked with flammable
liquids.
When switching on the dryer for the rst time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not
when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND
INDICATORS / Settings.
WARNING