Instruction for Use

7
- Remove the carbon or mesh filter and drain the water from the filter holder.
- Fit the new filter in the holder.
- Put the filter holder back in place and tighten the ring nut using the spanner supplied.
- Open the water supply again and make sure there are no leaks.
- Connect the mains and switch the dishwasher on.
- Access the menu and reset the filter count.
5 - FIRST TIME START-UP
Only use detergents and rinse aids specific for industrial dishwashers. Do not use normal washing up liquid. Do not use
detergents for domestic dishwashers.
Ask a specialist in chemical products for the correct choice of products to use and their quantities.
ATTENTION! MACHINE LIVE: Remove the front panel of the dishwasher to adjust the dispensers.
5.1 RINSE AID QUANTITY – RINSE AID DISPENSER
The rinse aid dispenser is always installed and there are two types: hydraulic (3) or peristaltic (1). They both work automatically.
The hydraulic dispenser (3) exploits the rinsing pressure to activate itself, while the peristaltic dispenser (1) is electrically
operated.
Make sure the CLEAR product suction hose is inserted into the container of the rinse aid products and that the little filter is
installed and also the weight on the hose (2).
To enable it, simply start the machine and run some complete wash cycles.
Adjustments: For each rinse cycle, the rinse aid draws a quantity of rinse aid product.
In the peristaltic dispenser (1), the minimum flow rate is obtained by turning the adjustment screw anti-clockwise, while the
maximum flow rate is obtained by turning it clockwise.
In the hydraulic dispenser (3), the minimum flow rate is obtained by turning the adjustment screw clockwise, while the maximum
flow rate is obtained by turning it anti-clockwise.
The dispenser is preset to intake approximately 5 cm of hose (0.70g.)
Too much rinse aid would leave the dishes streaky and would generate foam in the wash tank.
Dishes with drips of water and rather slow drying time mean that the quantity of rinse aid is insufficient.
Glass/dishwashers lower panel remove screws
Hood dishwashers lower panel remove screws