Instruction for Use

5
2 – TECHNICAL SPECIFICATIONS
Water supply temperature
°C
55
Water supply temperature (model with watersoftener)
°C
Max 30
Water supply hardness
°F
7 – 12
Water supply pressure
kPa
200/400
Water supply pressure (model with watersoftener)
kPa
300/400
Rinse cycle water consumption at 200 kPa
l
2,4/2,6
Wash water temperature
°C
50 - 60
Rinse water temperature
°C
82 - 85
Net weight
kg
Min.27
Max 131
Ambient temperature max
°C
40
Power cable type
◄HAR►
H07RN-F
Refer to the rating label located on the front cover of this manual or on the right side panel of the
dishwasher for the voltage and total power.
3 – POSITIONING
Bring the dishwasher to its installation location, remove its packaging and verify the integrity of the apparatus and of the
components. If damaged, written notification must be sent to the transporter.
The packaging elements (plastic bags, polystyrene foam, nails, etc) must not be left within reach of children and domestic
animals as they are a potential source of danger. All of the materials used for packaging are compatible with the
environment. They may be safely preserved, or may be disposed of at an appropriate waste disposal facility. The
components in plastic material subject to eventual disposal through recycling are marked in the following manner:
PE polyethylene: external wrapping, instructions bag, protection bags.
PP polypropylene: bands.
PS polystyrene foam: protective corners, packaging cover.
The wood and cardboard components can be disposed of by respecting the norms in vigor.
When disposing of the product, avoid leaving it in the environment; its disposal must respect the norms in vigor. All of the
metallic parts are in stainless steel and are detachable.
The plastic parts are marked with the symbol of the relative material.
POSITIONING:
Warning: the internal system and the locations in which communal apparatus are to be installed, must answer to
the norms in vigor.
The manufacturer declines any responsibility for direct damages to persons of things deriving from lack of respect for the
said norms.
Prior to installation verify that objects and materials which could be damaged by aqueous vapor or by spray from washing
solutions are not in the vicinity, or are adequately protected.
Position the dishwasher in the desired position and remove the protective wrapping. Level the dishwasher (with the help of
a level) on its four feet, regulating them in such a way so as to guarantee stability; any alternate solution must be approved
by the manufacturer. As placed and settled the dishwasher we recommend to fix all legs to the ground as showed in the
picture below