DISHWASHER Use & Care Guide

10
FLIP AWAY™ plate holders (on some models)
You can fold up all, or part, of the row of V-shaped flexible tines
at the back of the bottom rack. This is useful when washing a
variety of dishes, pots and pans, or roasters.
Fold-down tines (on some models)
You can fold down one row of tines at the back of the bottom
rack.
1. Grasp the tip of the tine that is in the tine holder.
2. Gently pull the tine out of the tine holder.
3. Lay the row of tines down in the rack to make room for larger
dishes, bowls, pots, pans or roasters.
Utensil caddy (on some models)
Use the utensil caddy to hold wooden spoons, spatulas, and
similar items.
The utensil caddy has three hooks. (See arrows.) For best wash
performance, hook the utensil caddy in the right rear corner of
the lower rack. You can also hook it in the left front corner.
NOTE: Spin the top spray arm. Be sure items in the utensil caddy
do not stop the rotation of the spray arm.
Utensil rack (on some models)
Use the utensil rack to hold specialty cooking items (wooden
spoons, spatulas, and similar items).
The utensil rack lies on the two supports in the right-hand lower
rack. Load the rack tray while it is in the dishwasher or remove it
for loading on a counter or table top.
When not in use, the utensil rack may remain in the dishwasher
and tilt out of the way.
You can also remove the utensil rack from the dishwasher. Swing
the two supports out of the way for easier bottom rack loading.
Place the entire row of tines in the down
position when washing a large number of
plates.
Fold away the plate tines to hold many bowls.
Fold away the entire row of both plate and
bowl tines to make room for larger pans or
roasters.