Installation guide

INSTALLATION INSTRUCTIONS
°
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
| 1 | Disconnect power )
rd
Disconnect electrical power at the fuse box or circuit
breaker.box before installing dishwasher.
a
| 2 | Shut off water supply —_}
Shut off the water supply to the dishwasher.
A
Do you already have utility
hookups?
Yes —Follow instructions in the “Prepare Cabinet
Opening—Existing Utilities” section.
No —Follow instructions in the “Prepare Cabinet
Opening—New Utilities” section:
~ Existing utility hookups No existing utility hookups
|
Water line
Prepare Cabinet Opening—Existing
Utilities
Check water and electrical
placement
SS Water line
SS
If the water line and the cable extend to the locations
shown, proceed to the “Install Drain Hose” section. If they
do not reach far enough, follow the instructions in the
“Prepare Cabinet Opening—New Utilities” section.
Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
--Power Supply Cord:
“Follow Option-A ‘instructions
Direct Wire:
.. Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a
cabinet next to the dishwasher cabinet opening.
1 | Power Supply Cord—Drill hole
Optional location
oN
SS
oH
Preferred location
Drill a 14%" (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.