Instruction for Use
20
Before cleaning or carrying out maintenance,
press the ON/OFF button.
1.
Clean the appliance exterior with a neutral
detergent. Do not use abrasive detergents.
2.
Regularly wipe the door seal and inside of the door
with a damp cloth to remove any food residues.
If the spray nozzles become clogged with food
residues,
clean the spray arms as follows:
Upper spray arm:
•
Slacken the fixing nut by turning it counter-
clockwise
A
and detach the spray arm by pulling it
down
B
.
•
Rinse the nozzles.
•
Remount the spray arm by aligning it with the
rotary mounting and insert it.
•
Tighten the fixing nut by turning it clockwise.
Make sure the nut is fully tightened (it should click).
Make sure the spray arm rotates freely.
Lower spray arm:
•
Press the two levers inwards which fix the spray
arm
A
and detach by pulling it up
B
.
•
Rinse the nozzles.
•
Remount the spray arm by aligning it with the rotor
pin and insert it.
•
Push the spray arm down until it is fixed in place.
•
Make sure the two levers are correctly inserted
(they should click).
Make sure the spray arm rotates freely.
Cleaning the filters
1.
Fully unscrew the wide-mesh central filter by
turning it counter-clockwise and extract it
A
.
2.
Fully unscrew the cylindrical filter and extract it
from the wide-mesh central filter
B
(pay due
attention to the holes in the bottom of the filter).
3.
Remove the fine-mesh filter
C
.
4.
Clean all the components.
5.
Reassemble:
Insert the cylindrical filter in the wide-mesh central
filter. Fit the fine-mesh filter and screw down the
filter unit by turning it clockwise. The filter unit
must be correctly assembled to ensure good
washing results.
MAINTENANCE AND CLEANING
BA
A
B
A
B
C
94000-gb.fm5 Page 20 Thursday, September 13, 2001 4:13 PM