AUTOMATIC WASHER Use & Care Guide GLA7900XK
loading your
For best washing results and
energy savings, sortthe laundry
carefully.
1. Sort the laundry into loads.
l
Group the laundry into loads that
can be washed and dried together.
See the Laundry Guide for informa-
tion and samples of typical loads.
l
Try to mix large and small items for
best movement in the washer.
2. Measure Detergent; Add to
Washer Basket.
l
See detergent information on page
6 and in Section IV of the Laundry
Guide.
l
Add dry bleach or water condi-
tioner (not fabric softener] if used.
Follow the package directions
carefully.
3. load the Washer.
l
Spread the load evenly. (Don’t put
all the towels on one side and a few
wash cloths on the other.] An unbal-
anced load can cause the washer to
shake during spinning.
l
Load without packing so items can
move freely for best cleaning and
least wrinkling.
4. Pour liquid Bleach into the
Dispenser.
l
See page 5 and the “Laundry
Aids” section of the Laundry Guide for
more information.
5. Pour Diluted Fabric Sottener into
the Fabric Sottener Dlspenser.
a See page7 and the laundry aids
section of the Laundry Guide for more
information.
Understanding
your Washer
This automatic washer has five
cycles. Each is designed for a fabric
type.
The washer has a LOAD SIZE
SELECTOR that lets you adjust the water
level to match the size of the load.
It has a TEMPERATURE SELECTOR.
You can select the wash water temper-
ature best for the amount of soil and
fabric type in each load.
Sections in this Use & Core Guide
go into detail on the “what and why”
of each setting, Read this and the Loun-
dry Guide carefully to get the best
cleaning results.
MAGIC CLEAN@
lint filter
l
The lint filter on your washer is self-
cleaning and operates at all water
levels It filters the water used in your
washer during the wash and deep rinse.
The filter is cleaned automatically dur-
ing the drain periods and the lint or fuzz
collected in it is carried away.
l
If your washer drains into a laundry
tub, check the drain strainer for lint
accumulation after washing a linty type
load. A lint accumulation may prevent
proper drainage and cause the tub
to overflow.