Instructions / Assembly

■ If the house has aluminum wiring, follow the procedure

below:

1. Connect a section of solid copper wire to the pigtail

leads.

2. Connect the aluminum wiring to the added section of

copper wire using special connectors and/or tools

designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended

procedure. Aluminum/copper connection must conform with

local codes and industry accepted wiring practices.

INSTALLATION INSTRUCTIONS

Prepare Location

1. Decide on the final location for the cooktop.

NOTE: Countertop must be 1³⁄₁₆" (3.0 cm) to 2" (5.1 cm) thick.

2. If necessary, make cutout in countertop before installing

cooktop. See “Location Requirements” section for more

information.

3. Clean cutout of any remaining dust and debris.

Install Brackets

NOTE: Kit Part Number W10310006 is required for installing the

cooktop into a solid surface or marble countertop. See the

“Assistance or Service” section of the Use and Care Guide for

information on ordering.

To Install Brackets into Marble Countertop:

1. Clean the brackets and cooktop cutout of any dust and

debris.

2. Measure the center line of the vertical sides of the cooktop

cutout.

3. Apply the adhesive provided in the kit to the back side of the

brackets.

4. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

5. Push the brackets firmly onto each side of the cooktop cutout

and wait 1 hour for adhesive to dry.

To Install Brackets into Wood Countertop:

1. Measure the center line of the vertical sides of the cooktop

cutout.

2. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

3. Attach the brackets in the cutout with the screws provided.

Center line

A. Bracket

B. Screw

1 h

Center line