Setup and user guide

1. “ON/OFF” button
2. Programme selector
3. “Start/Pause” button
4. Temperature button
5. “Spin button
6. “Start delay button
7. “Key lock“button
8. Option buttons
LED INDICATORS
9. Door locked
The doors are locked
10. Cycle end
The programme has ended
11. Washing phase
Indicates washing phase of the
cycle
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
CONTROL PANEL
PROGRAMME CHART
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter - behind plinth
7. Plinth (removable)
8. Adjustable feet (4)
1.
2.
7.
3.
4.
5.
6.
8.
DETERGENT DISPENSER
Main wash compartment
Detergent for the main wash, stain remover
or water softener. For a liquid detergent it
is recommended to use removable plastic
partition A (supplied) for a proper dosage.
If powder detergent is used, place the
partition into slot B.
Prewash compartment
Detergent for the prewash.
Softener compartment
Fabric softener. Liquid starch.
Pour in softener or starch solution only up to the “max” mark.
Release button
Press to remove tray for cleaning.
A
B
Max. load 6 Kg
Power consumption in o-mode 0.5 W / in left-on mode 8.0 W
Detergents and additives
Recommended
detergent
Residual
dampness % *
Energy
consumption
kWh
Total water lt
Programme
Temperatures
Max. spin
speed
(rpm)
Max.
load
(kg)
Duration
(Minutes)
Prewash
Main
wash
Softener
Powder Liquid
Default Range
Mixed
40°C - 40°C 1000
3.5
60
White 60°C - 90°C 1200 6.0 170
(90°)
Cotton 40°C - 60°C 1200 6.0 220
53 0.98 75
Cotton 60°C
- 60°C 1200 6.0 220
53 1.02 50
- 40°C 1200 6.0 220
53 0.98 75
Sport 40°C - 40°C 600 3.5 90
Duvet 30°C - 30°C 1000 2.0 110
Jeans 40°C - 40°C 800 3.5 70
Spin & Drain
1200 6.0 10
Rinse & Spin
1200 6.0 50
Rapid 30’ 30°C - 30°C 800 3.0 30
Colours 15°
15°C 15°C 1000
3.5
90
Wool 40°C - 40°C 800 1.5 75
Delicates 30°C - 30°C 1.0 80
Synthetics 40°C - 60°C 1200 4.0 195
33 0.75 72
Dosing required Dosing optional
This data may dier in your home due to changing conditions in inlet water
temperature, water pressure etc. Approximate programme duration values refer to the
default setting of the programmes, without options.
* After programme end and spinning with maximum selectable spin speed, in default
programme setting.
The washer adapts water, energy and programme duration to your wash load.
6th Sense - the sensor technology adapts water, energy and programme duration to your
wash load.
Cotton - Test wash cycles in compliance with regulations 1061/2010
These are the reference programs for the energy label. Set this wash cycles with a
temperature of 40°C or 60°C. They are the most ecient programmes in terms of energy
and water consumption for washing normally soiled cotton laundry. The actual water
temperature may dier from the declared one.
For all Test Institutes
Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.
Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.
EN
Quick guide
2.1. 3. 4. 5. 6. 7.
9.10.11. 8.
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.

Summary of content (4 pages)