Use and care guide

26
DOSING AID Helps to dose the right amount of
detergent for your laundry load.
Before using this option:
The concentration of detergents
available on the market diers
considerably. For that reason, adapt
the washing machine to the dosing
amounts of the detergents which you
use.
Furthermore, check if the washing
machine’s preset water hardness level
(soft) corresponds to your local water
hardness level – if not adapt it (see
“DOSING AID / FIRST USE”)..
See separate section Dosing Aid – First
use / Daily use
START DELAY Moves the start of your programme
to a later time. Helps to prot from
more favourable energy rates
(e.g.during the night), or to have the
laundry ready at a certain time.
Choose a delay up to 23 hours. Do
not use liquid detergent with this
function, to ensure that the detergent
stays in the detergent dispenser until
programme start.
• Select programme, temperature
and options.
• Press the “Start delay”
button – the start delay
symbol on the display blinks.
• Turn the knob to select a delay up
to 23 hours, which will be shown
on the display. Conrm the desired
delay by pressing the knob. The
start delay symbol on the display
lights up solidly.
Press Start / Pause - the
display shows the countdown
of the delay until start of the
programme. The Start/Pause button
lights up. The colon between hours
and minutes on the display blinks.
The door locks.
• If you have selected Dosing Aid, the
washing machine will calculate the
recommended detergent amount
after you have pressed Start/
Pause. Add the detergent amount
indicated on the display into the
detergent dispenser; use powder
detergent, to make sure that the
detergent stays in the dispenser
until start of the programme. Close
the dispenser and press Start/Pause
again, to start the countdown of the
selected delay.
• After the delay has expired,
the washing machine starts
automatically. The display then
indicates the remaining programme
duration.
To cancel the delay:
• press Start/Pause to cancel the start
delay (and press “Start/Pause” again
to start the selected programme
immediately, if desired)
• or press and hold On/O to cancel
the complete programme setting.