Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesFSCR 10433

PRODUCT DESCRIPTION

Before using the appliance, carefully

read the Health and Safety guide.

DAILY REFERENCE

GUIDE

CONTROL PANEL

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter/emergency drain hose

(if available) - behind plinth -

7. Plinth (removable)

8. Adjustable feet (4)

APPLIANCE

Before using the machine, the

transport bolts must be removed.

For more detailed instructions on how to

remove them, see the Installation Guide.

1. On/O button

(Reset/Drain if pressed and held

down)

2. Settings button

3. Auto dosing / Tank 1

4. Auto dosing / Tank 2

5. Fresh Care button

6. Sensing indicator

7. Finish in button

8. Temperature button

9. Spin Speed button

10. Options button

(Key lock if pressed and held down)

11. Start / Pause button

12. OK key (to conrm)

13. UP key

14. DOWN key

15. Display

16. Option indicators

17. Programme keys

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive comprehensive service and support,

please register your appliance at www.whirlpool.eu/register

30’

1 2

40° 60°

17.

2. 8.3. 9.4. 5. 6. 10. 11.

16.15.

12.

13.

14.

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive comprehensive service and support, please register your appliance at www.whirlpool.eu/register Before using the appliance, carefully read the Health and Safety guide. Before using the machine, the transport bolts must be removed. For more detailed instructions on how to remove them, see the Installation Guide. PRODUCT DESCRIPTION 1. APPLIANCE 2. 1. Worktop 2. Detergent dispenser 3. Control panel 4. Door handle 5.
PAGE 2
DETERGENT DISPENSER 2 Handle the dispenser with care. Avoid pulling or pushing hard the dispenser during opening and closing. 4 1 Automatic dosing: 3 IMPORTANT: Only use liquid detergent to fill the detergent tanks (“1” and “2”); never use powder detergent. 1 r ne fte So 2 1. Tank 1 • Liquid generic detergent OR • Liquid specific detergent (e.g. for colours, wool, sports garments etc.) IMPORTANT: Never fill Fabric Softener in Tank 1. Maximum filling quantity: 600 ml 2.
PAGE 3
EN Before using this function, follow the instructions in the USE AND CARE GUIDE/AUTO DOSING – FIRST USE to: 1. Set the correct water hardness level 2. Set tank 2 content. By default, Tank 1 is set for a detergent (your main detergent), and Tank 2 is set for fabric softener. If you do not use fabric softener, set Tank 2 for another detergent. You need to adjust these preset dosing values to the dosing values reported on the detergent and softener package that you intend to use.
PAGE 4
• Press the relevant button (for example the “Spin speed” button to change the spin speed). The display indicates that the value can be set. • Press the UP or DOWN key to adjust the value. For options selectable with the options button: press UP or DOWN key to select an option; afterwards press the OK key to confirm or deselect the option. The programme will continue automatically.
PAGE 5
EN PROGRAMME CHART Softener Detergent Detergent and additives Rinse hold Spin Max. spin speed (rpm) Finish in Auto dosing Selectable directly Fresh Care Rapid Intensive Rinse Heavy Soil Colours 15° Bio Stain 15 Hot Finish Prewash Max load (Kg) Programme Care labels Temperature Selectable using the Options button 1 2 — — — — ECO COTTON Cold/60°C max COTTON Cold/95°C max MIXED Cold/60°C 6.0 SYNTHETICS Cold/60°C 3.5 — DELICATES Cold/40°C 2.
PAGE 6
PROGRAMMES Observe the recommendations on the care labels of your laundry. DRAIN Separate programme to drain the water, without spinning. ECO COTTON Normally soiled cotton laundry. At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and energy consumption for washing cotton laundry. The values on the Energy label are based on this programme SPECIAL PROGRAMMES To set one of the following programmes, select the special programmes position.
PAGE 7
OPTIONS, FUNCTIONS AND INDICATORS Refer to the Programme Chart to check if options are available for the selected programme OPTIONS which are directly selectable by pressing the dedicated button Fresh Care Helps to keep your laundry fresh if you cannot unload it soon after programme end. The washing machine will start to tumble the laundry periodically a short time after programme end. This tumbling will last up to approximately 6 hours after end of your wash programme.
PAGE 8
Rinse hold (selectable with Spin button) Avoids automatic spinning of the laundry at the end of the programme. The laundry remains in the last rinse water, the display indicates the rinse hold and the programme does not continue. Suitable for delicate laundry which is not appropriate for spinning, or which should be spun with a low spin speed. Not suitable for silk. To select “Rinse hold”: • Press the spin button; select Rinse hold. The Rinse hold symbol on the display lights up.