Instruction for Use
20
GB
Wash cycles
Table of wash cycles
Anti Stain: the programme 1 is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher
than the standard class (A class). When running the programme, do not mix garments of different colours. We recommend the use of
powder detergent. Pre-treatment with special additives is recommended if there are obstinate stains.
Anti Stain Quick: this programme is ideal for washing the most difficult daily stains in 1 hour. It is ideal for mixed fabrics and colou-
red garments, caring for your clothes as it washes.
Whites: use this cycle 3 to wash white clothes. The programme is designed to maintain the brightness of white clothes over time.
Use powder detergent for best results.
Anti allergy Plus: use programme 7 to remove major allergens such as pollen, mites, cat’s and dog’s hair.
Anti allergy Delicate: cycle studied for cotton laundry and other resistant fabrics to guarantee the removal of pollen and cat and dog
hair already at 40°.
Eco cycles
The Eco Cycles assure energy saving by eliminating the need of heating water and it’s an advantage both to your energy bill and the envi-
ronment! These innovative Eco programmes (12 Eco Cottons, 13 Eco Synthetics and 14 Eco Fast 30’) are available for various fabrics and
different quantity of garment; they have been designed to guarantee a high cleaning action even at low temperature and can be used for
lightly to medium soiled loads. Eco Cycles give the best results thanks to an intensified wash action, water optimization and are carried out
in the same average time of a standard cycle. For the best washing results with Eco Cycles we recommend the usage of a liquid detergent.
Cotton Standard 20°C: the programme 11 ideal for lightly soiled cotton loads. The effective performance levels achieved at cold
temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying speed, with
repeated and frequent peaks.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual dam-
pness%
Energy con-
sumptionkWh
Total water lt
Cycle duration
Prewash
Wash
Bleach
Fabric
softener
CLEAN Plus
1
Anti Stain
40° 1000
3
- - - 170’
2
Anti Stain Quick
40° 1000
-
-
2,5
- - - 60’
3
Whites
60° 1000
-
3
- - - 165’
4
Cotton Standard 60°C (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1000
(3)
6
62 0,80 50,0 200’
5
Cotton Standard 40°C (2): lightly soiled resistant and delicate colours.
40° 1000
-
6
62 0,65 65 170’
6
Synthetics: heavily soiled resistant colours.
60° 1000
3
44 0,70 46 105’
6
Synthetics (4): lightly soiled resistant colours.
40° 1000
3
- - - 95’
SPECIALS
7
Anti allergy Plus
60° 1000
-
-
3
- - - 165’
8
Anti allergy Delicate
40° 1000
-
-
3
- - - 180’
9
Wool: for wool, cashmere, etc.
40° 800
-
-
1
- - - 65’
10
Delicates
30° 0
-
-
0,5
- - - 75’
ECO
11
Cotton Standard 20°C: lightly soiled resistant and delicate colours.
20° 1000
-
6
- - - 170’
12
Eco Cottons
Cold
Water
1000
-
-
6
- - - 80’
13
Eco Synthetics
Cold
Water
1000
-
-
2,5
- - - 70’
14
Eco Fast 30’
Cold
Water
800
-
-
3
71 0,04 32 30’
Partial Programmes
Rinse
- 1000
- -
6
- - - 36’
Spin and Pump out
- 1000
- - - -
6
- - - 10’
Pump out only *
-
- - - -
6
- - - 3’
1) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.
* If you select programme and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.