Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents GB English Installation, 2 Positioning and connection Description of the appliance, 3-4 Control panel Overall view Accessories, 5 Start-up and use, 6-7 Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 8 FF7190EP FF7190EX FF7190AEX FF7190AEP Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Replacing the lig
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Positioning and connection Positioning 1. Place the appliance in a well-ventilated humidity-free room. 2. Do not obstruct the rear fan grills.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. GB Fitting a new plug IMPORTANT:: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: - Connect Green and Yellow wire to terminal marked or coloured Green and Yellow.
Reversing the Doors plug I food into insulated containers whist carrying out this operation. 1. Lay down the appliance on its back.You may require assistance to carefully lay the appliance on to GB its back on to a suitable protective material (i.e. original packaging) *appliance lied down, must have protected the back side components (by using soft supports, EPS) 2. Working from the top of the appliance, remove the screws from the Hinge Block Exploded View door header cover .Remove the cover Fig.1 3.
GB Top Hinge Arm Door header cover Top Hinge Pin Fig.1 Fig.2 Step 5 Step 16 Fig.3 Fig.4 Step 6 Fig.5 Fig.
Description of the appliance GB Control panel POWER Indicator light REFRIGERATOR OPERATION Knob SUPER COOL Indicator light SUPER FREEZE Indicator light SUPER COOL Button • REFRIGERATOR OPERATION Knob to regulate the temperature of the refrigerator compartment. is the optimal temperature for energy saving levels. is the holiday function (see Maintenance and care). OFF switches the refrigerator off. • SUPER COOL (quick cool) to lower the temperature of the refrigerator compartment rapidly.
Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.
Accessories GB Refrigerator compartment SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. FRESH BOX*: for fresh meat and fish.
Start-up and use Starting the appliance ! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. ! The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. This will also occur if the power supply has been cut off voluntarily or involuntarily (power cut). 1.
Maintenance and care GB Switching the appliance off Replacing the l Odour filter During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: The filter should be replaced after approximately 6-8 months from when it is activated. This period may vary depending on the type of food that is stored. For information on where a replacement filter may be purchased, contact Assistance (see Assistance).
Precautions and tips ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE..
Troubleshooting GB Malfunctions: Possible causes / Solutions: The green POWER indicator light does not illuminate. • The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The motor does not start. • The appliance comes with a motor protection control (see Start-up and use). a) The alarm sounds.
Guarantee Guarantee GB 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
After Sales Service GB No one is better placed to care for your Hotpoint appliance during the course of its working life than us the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointservice.co.
GB PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24 15
195071867.
