Instruction for Use

GB30

AUTOMATIC OVEN CLEANING

For the description of this function, see the chapter CLEANING and the functions table at pag. 32.

To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:

1. Turn the “Functions” knob to symbol : the word PYRO appears on the display.

2. Press button to confirm your choice and start the pyro-cleaning cycle.

To select ECO pyro-cleaning, turn the “Browse” knob: the word ECO appears bottom right on the display. Press button to start

the shorter programme.

During pyro-cleaning, the oven door is automatically locked and the symbol appears on the display. The door remains locked

at the end of the cleaning cycle: “COOL” appears on the display, indicating the oven is still cooling down. When the oven cools

to a safe temperature, the symbol switches off and the display shows “END”.

N.B: if the automatic door lock control procedure fails to execute properly, the symbol appears on the display. If, on the other

hand, the door remains closed due to a fault in the locking system, and “DOOR LATCHED” appear on the display. In this case,

contact the After-sales Service.

SETTINGS

Turn the “Functions” knob indicator to the symbol to access a submenu containing four display settings which can be

changed.

Clock

Turn the “Functions” knob to the symbol : the word CLOCK appears on the display. To change the time of day, see the

previous paragraph (SETTING THE TIME).

Eco

With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the end of cooking.

In addition, the oven light is switched off during cooking. To view information on the display and switch the light on again,

simply press button or turn a knob.

1. Turn the “Browse” knob to display “ECO.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Acoustic signal

To activate or deactivate the acoustic signal, proceed as follows:

1. Turn the “Browse” knob to display “SOUND.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Brightness

To change the display brightness, proceed as follows:

1. Turn the “Browse” knob to display “BRIGHTNESS.

2. Press button : number 1 appears on the display.

3. Turn the “Browse” knob to increase or decrease brightness and confirm by pressing .

COOKTOP OPERATION

The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a

numerical scale corresponding to different power settings, and a series of function symbols.

• Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with

the cooktop).