DISHWASHER Use & Care Guide DU78OOXS

WATER HEATING HOLD SIGNAL LIGHT
&AN SIGNAL LIGHT
DELAY WdSH SIGNAL LIGHT
CHINA CRYSTAL Cycle
A light wash and gentle dry for
china and crystal. Unless AIR DRY is
selected, the heating element
cycles on and off during the “dry”
part of the cycle. Cycle time is
about 35 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 10 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
The AIR DRY Option
Air in the dishwasher is automatically heated
during the “dry” part of all cycles.
If the AIR DRY Optton is selected, air in the
dishwasher is not heated. Usina this option heIDS
save energy, but dishes take longer to dry (Over-
night) and some water spotting may result.
Some items [such as plastics) may need towel
drying.
For best results, use a liquid rinse aid such as
Jet-DrV
HI-TEMP WASHING Option
When this option is selected, water for the
main wash and the final rinse is heated tol45”F
(63°C).
If the water is already hot enough, the cycle
continues without delay. The WATER HEATING
HOLD Signal Light will be on while the cycle de-
lays for water heating.
Using DEW START
1. Push desired Cycle Selector Button.
2. Push desired Option Selector Buttons.
3. Turn Control Knob clockwise to the number of
hours [from 1 to 6 hours] you want the dish-
washer to delay before the selected cycle
starts.
4. Close and latch the door. The DELAY WASH
Signal Light will come on until the selected
cycle starts.
NOTES :
l You can add items while time is counting
down. Close and latch the door. The timer will
not advance if the door is unlatched.
l RINSE & HOLD, LOW ENERGY WASH and CHINA
CRYSTAL Cycles can’t be delayed.
Changing a setting
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
You can change a setting anytime during
any cycle.
1. Press in the door latch to unlatch the door
and stop the cycle.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Close and latch the door. The dishwasher will
automatically start the new cycle.
The CLEAN Signal Light
To turn light off, turn the Control Knob clock-
The CLEAN Signal Light will come on when a
wise slightly until the light goes off.
washing cycle is complete.
9