DISHWASHER Use & Care Guide

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and

utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.

(See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the

drawings shown.

■ Do not load glasses, cups, or plastic items in the bottom

rack. Load small items in the bottom rack only if they are

secured in place.

■ Load plates, soup bowls, etc., between tines.

■ Overlap the edges of plates for large loads.

■ Load soup, cereal, and serving bowls in the rack in a variety

of ways depending upon their size and shape. Load bowls

securely between the rows of tines. Do not nest bowls

because the spray will not reach all surfaces.

■ Load cookie sheets, cake pans, and other large items at the

sides and back. Loading such items in front can keep the

water spray from reaching the detergent dispenser.

■ Secure heavily soiled cookware face down in the rack.

■ Make sure pot handles and other items do not stop rotation

of the spray arm(s). The spray arm(s) must move freely.

■ Do not load items between the bottom rack and the side of

the dishwasher tub because they might block the water inlet

opening.

Fold-down tines (on some models)

You can fold down one row of tines at the back of the bottom

rack.

1. Grasp the tip of the tine that is in the tine holder.

2. Gently pull the tine out of the tine holder.

3. Lay the row of tines down in the rack to make room for larger

dishes, bowls, pots, pans or roasters.

10 place setting

12 place setting

Utensil load

Mixed load