Installation guide

HelpfulTip:Pushuponfrontofdishwasherto raise
dishwasheroffthegroundtoadjustfrontlegs.With
someinstallations,it maybeeasiertoadjustthefrontleg
usingthe3/16"hexheadsocketoradjustablewrench.
Placelevelagainsttopfrontopeningoftub.Checkthat
dishwasherislevelfromsideto side.Ifdishwasherisnot
level,adjustfrontlegsupordownuntildishwasheris
level.
Coppertubingonly:Slidenutthenferruleontocopper
tubingabout1"(2.5cm).
NOTE:Topreventvibrationduringoperation,routethe
watersupplylinesothatit doesnottouchthe
dishwasherbase,frameormotor.
Coppertubingonly:Putthetubingintothe90°elbow
fittingasfarasit willgo(thecoppertubingbendsand
kinkseasily).Slidethenutandferruleforwardandstart
thenutontotheelbowthreads.
Flexiblebraidedconnection:Securenuttoelbowusing
5/8"openendedwrenchoradjustablewrench.
NOTE:DonotuseTeflon®tapewithcompressionfittings.
Holdthe90°elbowfittingstillwithoneadjustablewrench
andtightenthenutwithsecondadjustablewrench.
Helpful Tip: Use a 5/8 open ended wrench for easier
access to tighten connection.
Place paper towel under 90 ° elbow fitting. Turn on water
supply and check for leaks. If leak occurs, repeat
previous step.
If needed, see website for animated representation
of this step. Visit www.whirlpool.eom/watersupply
under FAQ tab.
15