Manual
Portable Dishwashers (DP1040 model only)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Connecting the Faucet Adapter
NOTE: A special adapter must be installed on the faucet before the
dishwasher can be connected. Complete Installation Instructions
and the adapter are packed with your dishwasher. (See the
Installation Instructions.)
When moving your dishwasher, make sure the door is latched. Hold
the dishwasher at the top front corners.
Preparing the faucet
1. Remove the screen holder or aerator, screen, and washer from
the end of the faucet.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher will be
used.
NOTE: Remove and save the washer, screen, and screen holder or
aerator for future use.
A--
A. Washer
B. Screen
C. Screen holder or aerator
Connecting the faucet adapter to faucets with
external threads
Insert the 2 screens and then the thin washer from the faucet
adapter kit into the faucet adapter. Attach the adapter onto the end
of the faucet.
NOTE: Do not use the thick washer.
A--o_@
A. Thin washer
B. Screens
C. Faucet adapter
Connecting the faucet adapter to faucets with
internal threads
Insert the 2 screens, the thin washer, and then the thick washer
from the faucet adapter kit into the faucet adapter. Attach the
adapter onto the end of the faucet.
NOTE: Use both washers.
S ..... @
A. Thick washer
B. Thin washer
C. Screens
D. Faucet adapter
Connecting to Water and Electrical Supply
1. Run water at the faucet until it is hot. Turn off the water.
2. Pull the hoses out of their storage compartment on the back of
the dishwasher.
NOTE: Make sure the hoses are not kinked or twisted. Kinked
hoses reduce washing performance.
3=
Pull down on the locking collar while lifting the hose connector
onto the faucet adapter.
t
A. Faucet adapter
B. Locking collar
C. Hose connector