Installation guide

4 | Check door clearance
Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
B | Check inner spacing
el
ly +>
im =
<<
Ze
y
soon
(
meee
re
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
Remove towel and replace
lower dishwasher rack
Remove towel from dishwasher. Reinstall the lower dish rack.
If needed, see website for animated representation of this step.
Visit www.whirlpool.com/anchoring under FAQ tab.
Insulation
(on some models).:<
Place the plastic access panel against the dishwasher leg.
2 | Check access panel edge
S
SS
mN
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
3 | Tighten fasteners
Unlocked
Locked
)
Using a flat-blade screwdriver, turn the fasteners % turn to lock
into place. The fastener’s slot will be straight up and down when
properly locked.
19