Use and care guide

20
The programme starts automatically
at the end of the delay period. On
programme start, the delay on the
display is replaced by the remaining
programme duration.
When selecting a delay, the original
programme duration appears again
after the maximum possible delay of
23 hours. To exit the settings mode
again without setting a delay, select
the default programme duration.
To cancel a delay which has already
been started:
Either press Start/Pause to cancel
the delay. To start the selected
programme immediately, press Start/
Pause again.
Or press and hold On/O to cancel the
complete programme setting.
WATER
CONDUCTIVITY
SETTING
The drying results are aected by the
conductivity of the water used during
washing. If, by modifying the available
dryness levels (iron dry; cupboard dry;
extra dry), you are not satised with
the nal drying results, you can adapt
the water conductivity level.
The dryer comes with preset level 2.
Choose between
level 1 (most damp results)
and level 5 (most dry results).
Press and hold the Programme
button until the Conductivity
Adjustment symbol on the
display blinks.
Turn the knob to adjust the level (1 –2
– 3 – 4 - 5). Press the knob to conrm
the selected level.
This operation is not needed for every
drying cycle. Once the most
satisfying water conductivity level has
been identied, you no longer need
to modify it.