Use and care guide

33
EN
Your dryer is equipped with various automatic safety
functions. These enable failures to be detected in good
time and the safety system can react appropriately.
These failures are frequently so minor that they can be
removed within a few minutes.
TROUBLESHOOTING
GUIDE & AFTER-SALES
SERVICE
Problem Possible Cause Solution
DRYING TAKES TOO LONG
LAUNDRY IS NOT DRY
ENOUGH
Selected programme not
optimum for type of laundry
• Select the programme
matching best the type of
laundry; refer to section
PROGRAMMES
Door lter or bottom lter
clogged
• Clean the lters according to
the instructions in section CARE
AND MAINTENANCE
Laundry too wet • Make sure that laundry is spun
with the maximum spin speed
before drying. If laundry was
spun with spin speed below 800
rpm, the water tank may get full
during the drying programme.
The ambient temperature is too
high
• The ambient temperature
is ideal between 15 and 20°C.
If the ambient temperature is
higher, air the room.
DRYER DOES NOT START,
ALTHOUGH START/PAUSE HAS
BEEN PRESSED
Door not properly closed • Push door to close it until it
clicks shut
Key lock is activated • Press and hold the button
with the key symbol until the
display indicates that the keys
are unlocked.