user manual

SERVICE

19.07.2005 / Page 4 ADP 4300 WH Whirlpool Europe

Doc. No: 4812 728 11578 8511 764 43810 Customer Service

Technical data

Water softener setting

To change the water softener setting:

• Push the POWER button on

• Change to program 2

• Hold the START button for 5 seconds until the LED is ﬂashing

• Water softener setting is shown by ﬂashing LED

• By pushing the START button you can change the setting

• Push the POWER button off to save and exit the water softener setting

Accesory

If you need spare parts apart from the spare part list have a look in the Service Bulletin 4812 718 40084.

For higher mounted Dishwashers to prevent the drain off effect - also usable for lower drain pipes and to

prevent the failure F8 use Kit 4812 310 18993.

Water hardness Germandegrees

˚dH

French degrees

˚fH

English degrees

Clarke ˚e

mmol/l Water softener setting is

shown by ﬂashing LED

1 soft 0 - 5 0 - 9 0 - 6,3 0 - 0.9 1 x

1 - 2 soft/ medium 6 - 10 10 - 18 7 - 12.6 1 - 1.8 2 x

2 medium 11 - 15 19 - 27 13.3 - 18.9 1.9 - 2.7 3 x

3 medium/ hard 16 - 21 28 - 37 19.6 - 25.9 2.8 - 3.7 4 x (DEFAULT SETTING)

4 hard 22 - 28 38 - 50 26.6 - 35 3.8 - 5.0 5 x

4 very hard 29 - 35 51 - 63 35.7 - 44.1 5.1 - 6.3 6 x

4 extremely hard 36 - 60 64 - 107 44.8 - 74.9 6.4 - 10.7 7 x