Mode demploi LAVE-VAISSELLE FR Français, 1 EN English,13 Sommaire .
Installation .4 Conserver ce mode demploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, sassurer quil accompagne bien lappareil. Lire attentivement les instructions: elles contiennent des conseils importants sur linstallation, lutilisation et la sécurité de lappareil. En cas de déménagement, transporter lappareil verticalement; si besoin est, lincliner sur le dos. Mise en place et mise à niveau 1.
Raccord du tuyau dévacuation de leau Raccorder le tuyau dévacuation, sans le plier, à une conduite dévacuation ayant au moins 4 cm de diamètre. Ou bien laccrocher au bord dun évier; lextrémité libre du tuyau de vidange ne doit pas être plongée dans leau. A Un coude* plastique spécial facilite une installation optimale : fixer solidement le coude au mur pour éviter que le tuyau se déplace et déverse leau hors du conduit.
Description de lappareil .4 Vue densemble 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Charger les paniers Avant de charger les paniers, débarrasser la vaisselle des déchets plus importants et vider les verres et les coupes. Après avoir chargé le lave-vaisselle, sassurer que les bras de lavage tournent librement. Panier du bas Le panier du bas peut contenir des casseroles, des couvercles, des assiettes, des saladiers, des couverts etc.selon les Exemples de chargement.
Mise en marche et utilisation .4 Mettre en marche le lave-vaisselle Charger le produit de lavage 1. Ouvrir larrivée deau. 2. Appuyer sur la touche ON-OFF: tous les voyants du bandeau de commande sallument pendant quelques secondes. 3. Ouvrir la porte et doser le produit de lavage (voir plus bas). 4. Charger les paniers (voir Charger les paniers) et fermer la porte. 5.
Options de lavage* La sélection, la modification ou lannulation des OPTIONS nest possible quaprès avoir choisi le programme de lavage et avant dappuyer sur la touche Départ/Pause. Seules les options compatibles avec le programme choisi peuvent être sélectionnées. Si une option nest pas compatible avec le programme sélectionné, (voir tableau programmes) la led correspondante clignote rapidement 3 fois.
Programmes .4 En cas de vaisselle peu sale ou précédemment rincée à leau, réduire considérablement la quantité de produit de lavage. Le nombre et les types de programmes et des options, varient selon le modele de lave-vaisselle. Indications sur le choix des programmes Vaisselle et casseroles très sales (déconseillé pour la vaisselle fragile) Vaisselle et casseroles normalement sales. Programme standard quotidien.
Produit de rinçage et sel régénérant Nutiliser que des produits de lavage spéciaux lave-vaisselle. Ne pas utiliser de sel alimentaire ou industriel ni de produits pour lavage de la vaisselle à la main. Se conformer aux instructions reportées sur l'emballage. à présent possible. A chaque programme son degré de dureté: .4 Par ex.: 1er programme, degré de dureté 1 2ème programme, degré de dureté 2 etc..etc... jusquà 5* niveaux maximum.
Entretien et soin .4 Coupure de larrivée deau et de courant Fermer le robinet de leau après chaque lavage pour éviter tout risque de fuites. Débrancher la fiche de la prise de courant lors du nettoyage de lappareil et pendant tous travaux dentretien. Nettoyer le lave-vaisselle Pour nettoyer lextérieur et le bandeau de commande, utiliser un chiffon humide non abrasif. Nutiliser ni solvants ni abrasifs.
Précautions et conseils Cet appareil a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces avertissements sont fournis pour des raisons de sécurité, il faut les lire attentivement. Sécurité générale Cet appareil est conçu pour un usage de type non professionnel à lintérieur dune habitation. Cet appareil est destiné au lavage de vaisselle à usage domestique, il ne doit être utilisé que par des adultes et selon les instructions reportées dans cette notice.
Anomalies et remèdes .4 Si lappareil présente des anomalies de fonctionnement, procéder aux contrôles suivants avant de prendre contact avec le service dassistance technique. Anom a l i e s Ca u se s / Sol uti on s po ssi bl e s : Le la ve-va is s e lle ne dé m a r r e pa s . • L a fi ch e n ’es t p as b i en b ra n ché e d ans l a p rise o u i l y a u n e co u p u re d e co u ra n t. • L a p o rte d u la ve -va i ss e ll e n ’ es t p as bi e n fe rm ée .
Operating instructions DISHWASHER EN English,13 Contents Installation, 14-15 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Description of the appliance, 16 Overall view Control panel Loading the racks, 17 Lower rack Cutlery basket Upper rack Start-up and use, 18-19 DFP 275 Starting the dishwasher Measuring out the detergent Wash options Wash cycles, 20 Table of wash cycles Rinse aid and refined salt, 21 Measuring out t
Installation EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.
Connecting the water outlet hose Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water. A The special plastic elbow* makes it easier to find the best layout: fix the elbow to the wall securely in order to prevent the outlet hose from moving and spilling the dirty water.
Description of the appliance EN Overall view 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel*** Control panel Delayed start button and indicator light* Half load button and indicator light * Start/Pause button and indicator light * Select wash cycle knob ON/OFF/RESET button Washing and 3h.
Loading the racks Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. After loading the appliance, check that the sprayer arms can rotate freely. Lower rack The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. as seen in the Loading examples. Plates and large covers should be placed at the sides of the rack, ensuring that they do not block the rotation of the upper sprayer arm.
Start-up and use EN Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: all the indicator lights on the control panel will light up for a few seconds. 3. Open the door and pour in a suitable amount of detergent (see below). 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle by turning the WASH CYCLE SELECT knob in a clockwise direction: align the notch on the knob with the number or symbol representing the desired wash cycle.
Wash options* Half load* The OPTIONS may only be set, modified or reset after the wash cycle has been selected and before the Start/Pause button has been pressed. If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button: the indicator light will illuminate. Only the options which are compatible with the type of wash cycle set may be selected.
Wash cycles EN If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model. For available OPTIONS please refer to the Table of options on the Start-up and use page. Wash cycle selection instructions Heavily soiled dishes and pans (not to be used for delicate items). Normally soiled pans and dishes.
Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. Follow the instructions given on the packaging.
Care and maintenance EN Shutting off the water and electricity supplies Turn off the water tap after every wash cycle to avoid leaks. Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher The external surfaces of the machine and the control panel may be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Precautions and advice This appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. General safety The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The appliance must be used by adults only, to wash domestic crockery in accordance with the instructions in this manual.
Troubleshooting EN 195074380.00 12/2008 - Xerox Fabriano Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start. • • • The plug has not been inserted into the electrical socket properly, or there is no power in the house. The dis hw asher door has not been shut properly. A delayed start has been program m ed (s ee Start-up and use). No water drains out from the dishwasher.