Use and care guide

FAILURE INDICATOR AND MESSAGES

Make sure to

• Empty the water tank after each programme

• Clean the door lter after each programme

• Clean the bottom lter about every two months

Refer to section CARE AND MAINTENANCE for

emptying water tank or cleaning lters.

Failure Indicator Possible Cause Solution

The empty “Water Tank” lights on Water tank may be

• lled with water • Empty water tank; make sure to

insert it properly afterwards.

• not correctly positioned • Push in the water tank to make

sure that it is correctly inserted in

the tank compartment.

The “Bottom Filter” lights on

Bottom lter may be

• blocked by lint • Clean the bottom lter;

make sure to insert it properly

afterwards

• not correctly positioned • Push in the bottom lter and

move the release levers into

vertical position, to make sure

that the lter is correctly inserted

in the lter compartment. Close

the ap.

The “Door Filter” lights on

Door lter may be

• blocked by lint • Remove and clean the door

lter; make sure to insert it

properly afterwards so that it

completely integrates in the lter

compartment.

• not correctly positioned • Check position of the door

lter; make sure that it is properly

inserted in the lter compartment.