Instruction for Use

19
DRAIN HOSE
•
Drain hose connection to water outlet.
1.
Unhook the drain hose from the left clip;
see arrow
(A)
.
Important:
Do NOT loosen the drain hose connection;
see arrow
(B)
, otherwise there is the risk of
leakage (danger of scalding with hot water)
and the normal filling and draining functions
of the machine cannot be guaranteed.
2.
Fit the drain hose either to the siphon or hook
it over the edge of a sink or bath tub with the
“U” bend. Small hand basins are not suitable.
3. Minimum drain height: 60 cm.
Maximum U-bend drain height: 90 cm.
4.
If you need to add an extension, use a
flexible hose of the same type and secure the
union with screw-on hose clips. Maximum
overall drain hose length 2.5 m.
Important:
•
Make sure that there are no kinks in the drain
hose run.
•
Take precautions against it falling while the
appliance is running.
CONNECTION TO THE MAINS
•
Observe local utility company regulations.
•
The connection must be made with a
correctly installed, earthed and insulated
socket.
•
The system must be earthed.
The manufacturer declines all responsibility
for injury to persons or pets and damage to
property caused by disregarding the above
instructions.
•
The data concerning voltage, consumption
and necessary fuse are supplied on the
inside of the appliance door.
•
The mains connection cable may only be
replaced by original power cable by
authorised customer service.
•
The appliance conforms to European safety
regulations 73/23/EC, 89/336/EC and 93/68/
EC.
•
Do not use extension leads or multisockets.
INSTALLATION
00139gb.fm5 Page 19 Friday, September 15, 2000 4:27 PM