Instruction for Use

17
EN
17
tract and that no future arrangement, agree-
ment or contract will alter the substance of
the contents in this manual.
• Manufacturer’s obligations are detailed in
the appliance sales agreement, including full
and exclusive terms and conditions of war-
ranty.
• The terms of warranty in the sales agree-
ment shall be neither restricted nor extended
by the statements under this section.
• The instructions for use in this manual con-
tain information protected by copyright.
• The instructions for use in this manual must
not be photocopied or translated into ano-
ther language without the prior written per-
mission of the Manufacturer.
The manufacturer accepts no liability for
damage caused by:
• Improper or incorrect use not complying
with the intended use.
• Repairs carried out by unauthorized ser-
vice centres.
• Tampering with the power cable.
• Tampering with any component of the ap-
pliance.
• Malfunctions caused by water scale or
failure perform regular descaling.
• Malfunctions caused by operating the ap-
pliance at voltages other than what spe-
cied on the nameplate.
• Use of non-original parts and accessori-
es.
In such cases your warranty shall be null
and void.
Please contact an authorized technician for fur-
ther information or any issue not fully or clearly
detailed in this user manual.
The manufacturer reserves the right to
make any change due to regulatory, in-
dustrial, commercial or aesthetic reasons.
MACHINE CARE
Turn off all the switches and unplug the appliance,
and empty the tank after use.
• Store the appliance in a dry place, out of the
reach of children.
• Protect the appliance from dust and dirt.
USE
Power Cord
Fit the power cord on the bottom of the machine
based on its distance from the outlet.
Filling the tank (A)
1. Remove the tank (5) by turning it outwards
and lifting it upwards.
2. Fill the tank with water until maximum level.
3. Reinstall the tank (5) by slightly turning and
leaning it on the water valve. Press the top
part of the appliance until you hear a click.
Make sure that the tank is securely fastened
in order to prevent water spill.
ALWAYS disconnect the plug from the
electrical socket before lling the tank.
Use only cold tap water to ll the water
tank. Use fresh water, only. Do not use
sparkling mineral water or other uids.
Always ensure that the tank is lled with
water. Running the water pump with no
water will cause the pump to overheat.
Starting/Warming up (B)
1. Fill the tank with water until maximum level.
2. Connect the plug to the socket.
3. Press the button to switch the appliance on
(8).
4. Buttonsashwhenthemachineheatsup.
5. When the correct temperature is reached,
the temperature light illuminates.
Rinsing the appliance/inner circuits
Rinsetheappliancewhenusingforthersttime,
or in case it has not been used for a long time.
This quick procedure ensures all inner circuits are
rinsed.
1. Wash the tank (5) using a hard brush, water
and washing-up liquid, then clean it thorou-
ghly, dry it and put it back to place.
2. Fill the tank with water until maximum level.
3. Press the button to switch the appliance on