Instruction for Use

25
INSTALLATION
•
Install the appliance away from heat sources.
•
Install the appliance in a dry, well-ventilated place.
•
Ensure that the appliance is level. Adjust the front feet if
necessary.
•
Leave at least 5 cm clearance above the appliance.
•
Fit the spacers (if supplied) on the upper part of the
condenser at the rear of the appliance. For models without
spacer walls, the distance between the unit and the wall must
be at least 4.5 cm.
•
Clean the inside (see the chapter “Care and Maintenance”).
•
Fit the accessories supplied.
Electrical Connection
•
Electrical connections must be made in accordance with local
regulations.
•
Ensure that the voltage indicated on the appliance data plate
corresponds to the domestic supply voltage.
• Regulations require that the appliance is earthed. The
Manufacturer declines all liabilities for injury to persons
or damage to property resulting from failure to observe
these regulations.
•
If the plug and socket are not of the same type, have the
socket replaced by a qualified electrician.
•
Do not use extension cables, multiple sockets or adapters.
14