Use and care guide

11
EN
FIRST TIME USE
INSTALLATION
HOW TO USE
THE APPLIANCE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts
the operation automatically.
After starting the appliance, wait at least 4-6 hours
before placing food into the appliance.
TEMPERATURE SETTING
The appliance is normally factory-set for operation at
the recommended medium temperature.
For details of setting temperature - see the Daily
Reference Guide.
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator
INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on
both sides and above the appliance.
The distance between the rear of the appliance and
the wall behind the appliance should be at least
50mm.
A reduction of this space will increase the Energy
consumption of product.
50mm
50mm
When the appliance is connected to the power
supply, the display lights up and all the icons appear
on the display for approximately 1 second. The
default (factory) values of the fridge compartment
settings light-up.