Instruction for Use

GB30
Accessories:
• Soak the accessories in water with washing up detergent immediately after use, handling them with
oven gloves if still hot.
• Food residues can be easily removed using a brush or sponge.
Cleaning the rear wall and catalytic side panels of the oven (if present):
IMPORTANT: do not use corrosive or abrasive detergents, coarse brushes, pot scourers or oven sprays
which could damage the catalytic surface and ruin its self-cleaning properties.
• Operate the oven empty with the fan-assisted function at 200°C for about one hour
• Next, leave the appliance to cool down before removing any food residue with a sponge.
TO REMOVE THE SIDE GRILLES
The side accessory holder grilles are equipped with fixing screws (Fig. 1) for optimum stability.
1. Remove the screws and relative plates on the right and left with the aid of a coin or tool (Fig. 2).
2. To remove the grilles, lift the up (1) and turn them (2) as shown in Fig. 3.
MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
1. Remove the side accessory holder grilles (Fig. 4).
2. Pull the heating element out a little (Fig. 5) and lower it (Fig. 6).
3. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest
on the lateral supports.
MAINTENANCE
Fig. 1 Fig. 2 Fig. 3
WARNING
- Use safety gloves.
- Ensure the oven is cold before carrying out the following operations.
- Disconnect the oven from the power supply.
Fig. 4 Fig. 5 Fig. 6