Instruction for Use

INSTALLATION

Removal of transport bracket

The appliance is fitted with a transport bracket to avoid any

possible damage during transport.

Before using the appliance, the transport bracket at the

back MUST be removed.

1.Unscrew the two screws A and the four screws B with a

flat screwdriver or a No. 8 hex nut box spanner.

2.Remove the transport bracket.

3.Replace the four outer screws B on the machine and

tighten them.

4.Remove the two seals C from the hose holder and clip

them into the openings of the machine D.

Note: do not forget screw back and tighten the four outer

screws B.

3gb10082.fm5 Page 12 Monday, September 6, 2004 3:19 PM