Instruction for Use

80
DOOR LOCK
The door locks automatically after the programme
start until the end of the programme. If the programme
is stopped or the electrical supply is terminated, the
door lock will open after approximately 2 minutes.
PROGRAMME END
The programme sequence indicator is at “Stop”.
1.
Press the “ON/OFF” button.
The indicator light turns off.
2.
Cancel the special options by pressing the
appropriate buttons.
3.
Turn the water supply tap(s) off.
4.
Wait for the door to unlock (about 2 minutes).
5.
Open the door and unload the machine.
Note:
Do not fully close the door but leave it ajar to
allow the drum to dry out.
PROGRAMME RESELECTION
1.
Press the “ON/OFF” button.
The indicator light turns off.
2.
Select the new programme/temperature.
3.
Press the “ON/OFF” button.
The indicator light will come on.
DOOR LOCK / PROGRAMME END /
PROGRAMME RESELECTION