Use and care guide
34
4. Set the dosing quantities for the tanks.
The concentration of detergents available on the
market diers considerably; for that reason, the
dosing values of the auto dosing function need to be
adapted to the detergent / fabric softener you use.
The washing machine comes with the following
dosage settings:
• 80 ml DETERGENT for Tank 1
• 30 ml FABRIC SOFTENER for Tank 2
First check the dosing recommendations of your
liquid detergent / fabric softener:
• For liquid detergent: identify the dosing
recommendation for medium water hardness
and medium soil level indicated on the detergent
bottle.
• For fabric softener: check the dosing amount
recommended on the fabric softener bottle.
If the identied dosing recommendations dier
from the preset dosage settings of the washing
machine, the dosing values for the auto dosing
system need to be adapted.
• Press and hold the Settings button until the
display indicates that you have entered the
settings mode.
• Turn the knob to navigate to “10. CALIBRATION”,
and conrm by pressing the knob.
• Turn the knob to select the Tank 1 “DETERGENT
….ml” or Tank 2 “FABRIC SOFTENER/DETERGENT
….ml “, and conrm by pressing the knob. The
display indicates the dosing value which is
presently saved for the Tank you have selected.
• Turn the knob to select the indicated dosing
value. Afterwards conrm the new dosing value; a
checkmark will appear next to it.
• To exit the settings menu, select “BACK “;
afterwards select and conrm “EXIT” . Or
alternatively wait a few seconds until the settings
menu will be exited automatically.
5. Filling the tanks with detergents / fabric
softener
The tanks are now ready to be lled with detergent
/ fabric softener.
Observe that:
• the maximum lling quantity for Tank 1 is 600 ml
• the maximum lling quantity for Tank 2 is 400 ml
• fabric softener must not be lled into Tank 1
• never ll powder detergent into the tanks
Open the tank ap and carefully pour in the
detergent or fabric softener liquid. Do not exceed
the MAX mark.
MAX
MAX
2
Softener
MAX