Installation guide

7. Reattach disconnect switch cover assembly to subbase.

8. Attach a 12 A.W.G. ground wire to the ground terminal on the

disconnect switch and to the ground lug in the subbase.

Power supply wires will be connected during subbase

installation.

9. Replace all covers.

!. Ground wire to subbase ground lug

SUBBASE KITINSTALLATIONINSTRUCTIONS

Subbase Assembly

• Unpack and dispose of packaging materials.

• If your wall thickness is less than 6 in. (15.2 cm), the subbase

kit is required.

• If wiring through the subbase, connections must be made

behind the front cover. See "Make Electrical Connections."

3 4 5

!. End bracket 4. Front cover

2. Side skirt 5. Access cover

3. Leg bolt 6. Receptacle plate